Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Poplar bowl

Posts

Poplar bowl

#1

Poplar bowl

John Lucas

>This is a good save. This bowl started out as a thick bowl. I wire brushed the lip dyed it a red/burgundy then carved some little oval details that looked like eyes. I didn't sand it very well and there were sand marks that showed up after I applied the first coat of finish. I should have thrown it out instead I put it back on the lathe. I turned the bottom to match the shape of the top. Recut the foot to take my chuck and then reversed it and turned away the wire brush marks. Cleaned up the inside and then textured the outside rim with a 3 point tool. Then I carved some details in the lip to look like some sort of lanquage. This time I payed closer attention to the sanding. Finished with 3 coats of lacquer. I didn't want it plastic looking so after fine sanding with 400 grit I steel wooled it and then buffed with the beal. It's nice shine without looking too thick.


img

Re: Poplar bowl

#2

maple bowl

John Lucas

>This is one of the bowls I turned during the empty bowls demo. I decided on a finish that I used to use. After a rub in coat of lacquer I sanded it with 320 then 400 grit. Then I sprayed on several coats of lacquer and sanded with 600 grit to get rid of some minor orange peel (it was raining outside and I spray in my door). Then I rubbed it to a dull sheen with 4/0 steel wool and then rubbed in Johnsons floor wax. I really like this look. It has more of a natural wood appearance.

The lip of this one was textured with the Sorby texturing tool.


img

Re: Poplar bowl

#3

Re: Poplar bowl

Ed Kelle

>Very nice, I like everything you did on the rim. I'm glad you rescued this one. Super cool!

Re: Poplar bowl

#4

Those are two really nice ashtrays, John

Carole in VA

>Carole ducks for cover....;)

Re: Poplar bowl

#5

Cherry bowl

John Lucas

>This is another bowl I turned at the empty bowls demo. It was turned from green cherry. I turned the beads with the 3 point tool. It left very minor tearout on the top of the bead so I cleaned them up with my small spindle gouge which is ground with the ellsworth grind.

The bottom was textured with a dremel engraver with a rounded over bit. This one was finished with Walnut oil. It's a little more satin than I like so I may work on it some more.


img

Re: Poplar bowl

#6

Re: Those are two really nice ashtrays, John

John Lucas

>These are Cuban Cigar ash trays. I'm going after the big market.

Re: Poplar bowl

#7

Seriously, though

Carole in VA

>They are both gorgeous, but the maple one is one of those pieces that if it were sitting in the middle of 50 turnings, my eyes would fly right to it and I would say "that's the one"! I absolutely love it.

Re: Poplar bowl

#8

Re: Cherry bowl

Barry Turner

>Lemme know how long that stuff (Walnut Oil) takes to dry. I used the Mike Mahoney version on a Honduras Mahogany bowl about a month ago and it still feels oily.

Re: Poplar bowl

#9

JL

Re: Those are two really nice ashtrays, John

JL

>The second ashtray (maple) is really nice.

Re: Poplar bowl

#10

Mahoney Oil

Carole in VA

>It takes a loooong time to dry if it's at all humid. In fact it seems to take a long time even if it is what we consider around here to be "not humid". Probably because the wood itself never gets to a really low moisture content here.

Re: Poplar bowl

#11

Re: Poplar bowl

Dale Cook

>I like all three of these you posted,I really like the poplar bowl,the rim really sets it off.Very nice job.

Re: Poplar bowl

#12

Re: Cherry bowl

John Lucas

>Barry I'm new to Walnut oil. I don't know what brand this is because my friend Joe Looper gave it to me. It does take a long time to dry. John

Re: Poplar bowl

#13

Re: Poplar bowl

George Van in WI

>Hi John, two nice bowls, I guess my favorite is the poplar; I like the branch figure with the rim detail.

I’m glad you described your finishes; I was looking for one like the maple bowl for a spalted one I hope to finish. With the spalting I’m surprised you were able to keep the bark. Or maybe I'm just unlucky?

Did you apply the walnut oil while the bowl was still green?

Re: Poplar bowl

#14

Re: Poplar bowl

John Lucas

>George On the Cherry bowl I did apply the oil while it was green. The main reason was that I had a crowd watching and they love to see the color pop when you put a finish on. The other reason was that it was very windy and hoped that the finish would slow down the drying a little.

I usually can't keep the bark on if it's been sitting any time at all. That's because my wood has to sit on the ground and the bugs get in. Once they start on the cambium layer the bark won't stay on.

Re: Poplar bowl

#15

Re: Mahoney Oil

Barry Turner

>Well, I live in Kentucky........it's always humid here. But, my Honduras Mahogany blank was pretty dry. I haven't used BLO in a long time, but I think it dries faster than this stuff.

Re: Poplar bowl

#16

Re: Cherry bowl

Barry Turner

>So am I. Of course, I am new to most everything. I bought the Mike Mahoney Walnut Oil because the advertising said it was heated in processing so that it "hardened". (It just didn't say when!) I tried to send Mike Mahoney an email, but it never would go through. So, I guess I will just wait some more. Let me know how yours turns out.

Re: Poplar bowl

#17

Re: Poplar bowl

George Van in WI

>Thanks John, glad to see I'm not alone!