Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

ancient vase

Posts

ancient vase

#1

ancient vase

Ed Kelle

>Done from an old piece of oak firewood, about 7" tall, it has some softer sapwood still on one side, had a check or two in it as well. A small catch broke off a piece, so once again I decided to do some texturing on it, this time with my dremel engraver, as well as an attempt with the Sorby texturing tool, still need a lot of practice with that one. Colored with a few washes of black oil paint followed by a few washes of alizarin crimson. Working towards the appearance of an ancient relic, maybe dug up from somewhere. I am still considering dry brushing some gold paint on the surface here and there, but I am going to let this sit for a while before I decide. I like the form, and I also like the subtle colorings to this one, there is more crimson than is shown in the photo, but overall this is a dark piece.

I'd like some critiques on this one, thanks


img

Re: ancient vase

#2

Re: ancient vase

Jennifer@Indy.USA

>Hi Ed,

I like it!....but could we get another photo...maybe with some more light and closer up? I'm really curious about the coloring and the texture and I can't really make it out? It looks great from here though, but I want to see more detail. What is Alizarin Crimson wash? The color of a dye? It definitly looks like an old relic. Nice job!

Jennifer

Re: ancient vase

#3

Re: ancient vase

Gary Ljostad

>Ed, I think the shape and surface enhancement are wonderfull. My only critique would be, I think the base is too heavy. I would loose the base, maybe just below the bead, or all together. I'm no expert on form but to my eye that would look better. Even with the base this is a super piece.

Re: ancient vase

#4

closeup

Ed Kelle

>Thank you Jennifer. Hope this shot helps a bit. It looks good on my Mac but might be darker on a PC. Let me know if it is and I can lighten. I initially tried the Sorby texture tool and got mostly rough spiral type shapes. not too satisfying. Then I took out my Dremel engraver, picked up that thanks to your posts, and I did a bunch of linework all over. Some areas I did deeper than others.

as for the washes, I just take my artist oil paints and squeeze out a little blob, and mix this with a bunch of mineral spirits to turn it into a very liquid state. I apply it with cheap 10 for a dollar nylon "art" brushes. I don't even bother with good paintbrushes for these treatments. I prefer mineral spirits to turnentine due to less smell but you could use it just as effectively. I brushed on the black, let it dry. gave another coat here and there, dry. and later did the same with the alizarin crimson, its a nice deep red and in comparison to other oil paints, it tends to be a little more transparent and wetter to begin with.

Basicly I take the paints and turn them into stain, since they are both pigmented. You can do this with any oil paints. The nice thing is, you can mix up any colors you want. I have some metallics I might use in the future.


img

Re: ancient vase

#5

Re: ancient vase

Ed Kelle

>Thanks Gary. I see your point about the base, I think it should be shorter possibly. Just a little too bulky right now. Its good advice like that which will help me in the future.

Re: ancient vase

#6

Oh, Goodie!

Jennifer@Indy.USA

>Thanks Ed,

Great close-up and thanks for the tips with the paints. I love adding new things to my arsenal!

Jen