Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

long hole boring supplies

Posts

long hole boring supplies

#1

long hole boring supplies

mike recchione

>I'm usually (when I'm anywhere) over on hand-tools or woodcarving, but I've come around here with questions a couple of times, and was very grateful for the help I received. Here's another, which I may have asked in a different form a number of months ago:

I've started making woodwind instruments (mostly pennywhistles, but some flutes, etc.) from various materials and want to try my hand at turning some from wood. Axminster in the UK has long hole boring kits that include a number of options including your choice of one of two types of auger, one of two types of hollow center, and a counterbore drive that has a prong that goes into the hole that was bored so that the stock stays centered on the hole while you're truing it up.

I haven't found a supplier that carries all this stuff in the USA. (CS and WC carry the lamp augers and hollow centers, but not the other stuff). My questions are: Do I need the other stuff? Do you know of a supplier in the US or Canada? How painful is it to order direct from Axminster? (shipping, customs, exchange rate, etc.)

Thanks in advance,

Mike

Re: long hole boring supplies

#2

flutes

JKJ in East TN

>Mike,

I don't know about the boring, but I was reading an intersting article just the other day about making wooden flutes. I don't remember the magazine (it may have been an old FWW), but if you are interested I'll look for it.

JKJ

Re: long hole boring supplies

#3

Re: flutes

mike recchione

>I think I saw that also - wasn't it in a recent either FWW or PW?(those are the only WW magazines I get) - they profiled a flute maker who makes high-end wooden flutes in a home shop. Unless you're talking about a different article. The article I saw was what got me cranked up to try wooden instruments again - I've been using PVC and copper pipe, and bamboo, which works very well. But somehow it misses the warmth of wood.

Re: long hole boring supplies

#4

Re: flutes

Craig Daymon

>I think it was the latest issue of Woodwork magazine, an article about making Irish (I think) flutes from blackwood.

Re: long hole boring supplies

#5

Re: flutes

mike recchione

>The one I saw was in the 10/05 issue of Popular Woodworking.

Re: long hole boring supplies

#6

Turning flutes

Fred in NC

>Best way to get a concentric hole is to first drill the hole in the blank, and slip the blank over a steel mandrel. Such a mandrel can be made from steel drill rod, which comes in a great variety of sizes. The mandrel can be mounted in a number of ways: chuck, collet, or a Morse taper can be turned in the end of the mandrel. The other end should have a 60 degree hole for the live center.

Since a steel mandrel (shaft) runs very true, the walls of the flute will be nice and concentric. It keeps the flute body from bending and breaking while turning.

Please contact me if you need more info. I have access to metal working machinery, and have made mandrels before.

Replace the 'AT' with @ for my email address.

Re: long hole boring supplies

#7

Re: long hole boring supplies

Bob Way, Canton, MI

>Hi Mike,

I'm not sure I can answer your questions directly because the flutes I have done have been more Native American in construction and are bored from each end with a wall between the channels. Anyhow, one of the construction techniques is to make the instrument in two halves with half the channel either routed, carved, bored, etc. The two halves are then assembled and turned to final shape on the lathe. By taking a single piece of material for the flute body, splitting it in half, doing the internal machining, and then reassembling it's possible to keep the grain matched or even get a little creative with different woods should the mood strike you.

There is also a Native American Flutemakers forum, and while most members do these kinds of flutes, I'm sure there are some folk that can help you with the long boring tools question.

Re: long hole boring supplies

#8

Re: long hole boring supplies

Scott Hogsten

>What you need to do is make a D-drill - I was experimenting with wooden flutes last year and made a couple of these. They really work well I drilled 30 inch long holes through some blanks dead center. You do need to remove and clear the shaving often.

http://www.geocities.com/Paris/5701/smallpipes/tools.htm

Note: I am still looking for a good way to make a reamer to smooth/polish/contour the bore after boring.

Scott

Re: long hole boring supplies

#9

Re: long hole boring supplies

Fred in NC

>Very good article.

In the US, silver steel is known as drill rod. It can be bought from suppliers like McMaster and Enco in 3 ft lengths, in a multitude of sizes, and is relatively inexpensive. The oil hardening type is most useful. Use oil to quench it (peanut oil is best). It comes annealed (not hardened) and the tip can be easily be hardened with a torch.

Re: long hole boring supplies

#10

D-drills and reamers *LINK*

mike recchione

>I had thought about making a D-drill. The lamp auger that CS sells is actually a shell auger, which doesn't have to be cleared as often. Axminster sells that and also another type of auger that they claim bores very straight long holes and clears its own chips. Making a D-drill is my fall-back plan.

On the subject of reamers, there are a couple of designs explained in Trevor Robinsons' book "The Amateur Wind Instrument Maker". A simple design that a lot of people use over on the Chiff and Fipple forum is a wooden-bodied reamer made using a hacksaw blade. Here's a link to that design.


http://www.flutes.fsbusiness.co.uk/Wooden.html

Re: long hole boring supplies

#11

Native American flutes

mike recchione

>I've read a bunch about making Native American flutes, and the technique of making them in two halves that you glue together after routing the bore. I'm not sure why that technique has never caught on for making recorders, pennywhistles or other types of flutes and woodwinds. It's certainly something to think about. I may try one just to see how it works out.

Re: long hole boring supplies

#12

Re: Native American flutes, glued from 2 halves

Russ Fairfield

>I would suspect that the 2 glue lines in the instrument would change the resonance of the wood, and that you could tell the difference in the sound.

Re: long hole boring supplies

#13

Re: Native American flutes, glued from 2 halves

John Lucas

>Russ it would change the sound but maybe not bad. Remember guitars and violins are glued.

Re: long hole boring supplies

#14

Found the article

JKJ in East TN

>I found the article, "How to Make a Wooden Flute" by Whittaker Freegard. It's in FWW but it's not quite a current issue, #44, Jan/Feb 1984, page 64.

Excellent article with good diagrams covering design, preparation, boring, turning, tuning, and playing. For boring, the author said he drills a short 1/2" pilot hole about 2" deep with a twist drill, then full length pilot hole with a shell auger, then full bore with a Planetor bit.

JKJ

Re: long hole boring supplies

#15

Re: Found the article

mike recchione

>I saw that in the index on Taunton's website. Unfortunately, it's out of print. Oh well... BTW, what's a Planetor bit? It looks like now I need to buy yet another thing :-) It never ends...

Re: long hole boring supplies

#16

Re: Found the article

JKJ in East TN

>I did a google search for Planetor bit and got lots of hits.

JKJ