Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

steaming

Posts

steaming

#1

steaming

woodspinner/ Bill Hale

>I do not remember seeing anything about steaming instead of boiling to cure. I was thinking it would take a lot less propane to maintain steam in a large container than a boil. My thought was to use a galvanized tub with an auto water level controll and a lid. Put in a wire rack for wood support and cook it that way.

Any thoughts ?

Bill in Casa Grande, AZ.

Re: steaming

#2

Re: steaming

Doug Trembath

>Bill, if the wall is thin, it may work, but in my experience, it takes boiling about an hour per inch of thickness for the heat to sufficiently penetrate the wood to release the lignin bond on easy timbers, and some take up to four hours per inch, such as Madrone. I'd try just putting a wood fire (cutoffs work well) under your boiling pot.

YMMV, of course.

Doug Trembath

Studio in the Woods