Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Shop Equipment questions

Posts

Shop Equipment questions

#1

Shop Equipment questions

Craig Daymon

>I finally have a house again. (Moving in this weekend.)

First shop purchase will be dust collection. I have a Oneida Super Gorilla on order, but that is 3 weeks out at best. I'm considering a Grizzly G0440, also 2HP, a bit cheaper, probably available and looks like slightly easier maintenance (drum on casters, easier filter cleaning and REMOTE SWITCH - Nice touch). Any comments?

Also a possibility, a Powermatic 3520. Probably from Osolonik since they seem to have the best price, $2399 for 3520A or $2699 for 2530B delivered. Is the B worth another $300? Is Osolonik really the best price going? (I'm in PA, if that makes a difference...aside from maybe forcing me to paint it white.) Finances might keep this from being an immediate, move-in purchase, but it's on the list.

Thanks in advance,

Craig

Re: Shop Equipment questions

#2

$2149... *LINK*

Peter Teubel

>Best price I found was $2149 with free shipping from Equipment Sales and Surplus. They have a store on eBay and deal in surplus Jet, Powermatic, Performax stuff.


eBay

Re: Shop Equipment questions

#3

Re: Shop Equipment questions *LINK*

Earl Eyre

>Bought mine at Southern Tool. Here's the link. You save $100 (2199) on the A but the B is more. I have the A and am very happy. Can't really say if the B is worth the extra bucks because I haven't seen it or tried it. Southern Tool was very prompt and the lathe was actually delivered right into my garage, while their site says only to the freight dock.

Earl


http://www.southern-tool.com/store/powermatic_20_lathe.html#273

Re: Shop Equipment questions

#4

Re: Shop Equipment questions

W.C. Turner

>I got my 3520A from www.thetoolnut.com

He usually beats any other price.

W.C.

Re: Shop Equipment questions

#5

Re: Shop Equipment questions

John Lucas

>Everyone from our club who has a Powermatic bought them from the Toolnut. We are all happpy customers.

Re: Shop Equipment questions

#6

Correct site?

Craig Daymon

>Is that site correct? It seems to be a search site. I'm wondering if the address is correct. There were no tools listed directly on the site, only the ability to search for tools available on other sites and the links I got from searching were just links to other search sites with the input string I gave, "Powermatic 3520".

-Craig

Re: Shop Equipment questions

#7

Re: $2149... *LINK*

Craig Daymon

>Peter,

Thanks. You forced my hand with that link. I followed it to the company site, link below, and they have the 3520A delivered for $2099.99, no need to ebay bid. Great deal.

-Craig


Equipment Sales And Surplus

Re: Shop Equipment questions

#8

Whoa Craig! You sneaky devil!

Dominic Greco at home in Richboro, PA

>

Check out Craig with the big lathe! :>) When you say you're going to upgrade from a Jet Mini, you REALLY mean it!

That is a cool find! Now you'll have to turn some big bowls. I'll save a nice big chunk of dried Osage for you (heh heh heh!).

I tell ya, I'd stick with the Oneida. Their efficient, quiet(ish), and will hold their value. From past experience, I've been informed that the Grizzly DCs tend to have motors that crap out of them (those more knowledgable, please correct me if I'm wrong!). And as far as a remote goes, you can make one up yourself.

You've ridden a public transport bus before right? You know those cables that run along either wall, just about eye level in the bus. You want the bus to stop so you pull the cable and it rings a bell? Hook up a DPDT (is that right?) switch to a similar cable running overhead of your lathe. Pull the switch, turn on the DC. Pull again, off it goes!

See ya on the 17th.

Dominic

Re: Shop Equipment questions

#9

toolnut...

W.C. Turner

>Craig,

The toolnut site has changed since I bought 3520 from him. Used to type in the item you wanted to buy, & give the best price you had found, & toolnut would beat it.

Anybody know what happened?

Re: Shop Equipment questions

#10

Re: Whoa Craig! You sneaky devil!

Craig Daymon

>I figured I had to do it now or wait several years for a similar deal. Of course, I still need to find an electrician in the area to set up some "proper" shop power outlets so this thing doesn't end up a massive pape weight. (Luckily, I have LOTS of paper, in the form of woodworking magazines.) Need an electrician that doesn't want to install dryer outlets everywhere I want 220, like happened in the last house. Also, 20 amp to the 110's. (Not that I know what I'm talking about. If I did, I wouldn't need an electrician.)

I'm looking forward to getting past the 10" bowl limit. Nate mentioned he was getting an order of Australian burl in and might add to the order for anyone that wants some. I imagine none of those will be small. (Or light.) ;-)

-Craig

Re: Shop Equipment questions

#11

ToolNut 877-886-5688

Ron in Drums PA

>