Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

wood coloring

Posts

wood coloring

#1

wood coloring

woodspinner/ Bill Hale

>Sory this is a little off subject but I need help.

I have a large oak table that has been treated with lemon oil for years.

I need to stain it to a cherry color the same as commercial furniture. Any help is appreciated. I know to try in an out of sight location.

Thanks! Bill in Casa Grande, AZ.

Re: wood coloring

#2

Re: wood coloring

John Lucas

>Bill I buy several different colors of minwax stain and then mix to match the color I want. For example you might start with cherry. If it needs to be more yellow add a few teaspoons of Golden Oak. If it needs to be darker add some ebony. More red add some mahagony stain. There are other ways to do it but this has worked for me. When I get the color really close I will add some colorant to whatever finish I use to really fine tune the color.

Analine dye also works well if you have some on hand. Thkey don't usually sell it in the box stores.

Re: wood coloring

#3

Re: wood coloring

RevDoug

>Gell stain will be your best bet. You might want to give the table top a good sanding with fine sand paper and wipe it down with minerial spirits to draw the lemon oil out of the surface. But, like you said, try it on the bottom to see how it works.

Turn 'em round,