Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Maple Vessel (pics)

Posts

Maple Vessel (pics)

#1

Maple Vessel (pics)

Bill Grumbine (Kutztown PA)

>Greetings everyone

It has been a while since I posted any pictures of anything I have turned, mainly because it has been a while since I turned anything that was not a) student related or b) production related. ButI am finally getting some creative time on the lathe. Below is a piece of maple that Dominic of all people should recognize, since he has been working on a chunk of it himself.


This is a chunk of red maple burl from a tree I harvested a year ago. I got three truckloads of this stuff, and my truck, with its 1900 lb payload, was down on the axles almost each time. Now that I am looking closer at the picture, I think I am going to have to retake it since the depth of field seems to be a bit shallow. But anyway...


Here is a shot of it from the other "side". This piece of wood has just about everything maple can have - burl, curl, bug holes and streaks, and just a little bit of spalting. It is approximately 8" in diameter and 5 3/4" high, and hollowed out to a thickness of about 3/16". I thought about doing a Wally wall of 1/8", but those inclusions were starting to make me nervous. I hollowed it with my blasphemous torque arrested laser guided hollowing rig that Randy Privett made for me. You can see pics of it on his site, www.monster-wood-tool.com.


Here's the bottom. I like them rounded (no cracks now!), which I understand is authentic to southwestern shapes. I had to get my big fat hand in the picture to keep it from rolling off the table. It rocks back and forth for a long time when given a shove.

If you are going to Totally Turning, and all goes well, you will be able to see it in person at the instant gallery. Thanks for taking a look.

Bill

Re: Maple Vessel (pics)

#2

Steven Antonucci

The holes just make it easier to clean out...

steve antonucci

>Good looking piece of wood. But a torque arrestor! I would have thought you would use this as an opportunity to develop your turning muscle...

Steve

Re: Maple Vessel (pics)

#3

Keith Tompkins

Re: Maple Vessel (pics)

Keith Tompkins

>I was just thinking...Totally Turning would certainly be a good place to debut this one! Wow!

Re: Maple Vessel (pics)

#4

Name that burl!

Dominic Greco at home in Richboro, PA

>

"I can name that burl in one picture!"

So,...it appears that you finally got around to turning some of that truly awesome looking burl? About time my friend! :>)

Truthfully, it looks great! The overall shape and voids really lend this an "artsy" air. I'm assuming that the finish you used was Watco's Danish Oil on this. Right?

I'm amazed that this burl had so many of the characteristics of eye catching wood. We should call it "Spalted Ambrosia Fiddleback Burl" with an extra helping of "Bird's eye figure" on the side. :>)

It's certainly not boring wood to work with! I've made several dozen bottle stoppers and pens from the scraps left over from bowl and hollow form turning (you know,..."Buffalo-ing" all I could). And it seems that each one is different from the last.

This should really get them talking at "Totally Turning". Have fun and say "Hi" to all the WC'ers you meet for me.

See ya around,

Dominic

Re: Maple Vessel (pics)

#5

Re: Maple Vessel (pics)

JamieDonaldson

>Hey Bill- in spite of your having violated so many rules of pure hollowing aesthetics with all those gadgets, this is a wonderful piece of work, and the wood is used to full advantage. And you have tons of this treasure???

Re: Maple Vessel (pics)

#6

Re: Maple Vessel (pics)

Carole in VA

>Wow! That's beautiful, Bill! If you don't mind my asking, how do you reverse chuck something like that to finish the bottom? The natural edge on the neck looks fragile.

Re: Maple Vessel (pics)

#7

Re: Maple Vessel (pics)

Brian McInturff

>Carole,

I'm thinking he used a large vacuum chuck. Got it fit to size just below the burl hole. Am I correct Bill?

Re: Maple Vessel (pics)

#8

Re: Maple Vessel (pics)

Bill Grumbine (Kutztown PA)

>Thanks everyone, for the kind words!

Steve, I used my turning muscle to make contact with the lathe. ;-)

Keith, I will be waving it around looking for you up there!

Dominic, I have been shuffling this piece of wood around all summer long, actually since early spring. I can't wait to get back to the stash for the next piece. I too have been buffaloing it with bottle stoppers, tool handles, etc.

Jamie, I'm not violating rules, I am "pushing the envelope". ;-) I do have a bit of this stuff. Dominic was going to go with me to harvest it, but we could not coordinate, so I dropped a chunk that must have weighed 200 lbs or better in his driveway while he wasn't home. You can imagine the phone call I got later on that day!

Carole, reverse chucking was a bit of a challenge, as you are right, the neck is fragile. What I ended up doing was using my vacuum chuck as a friction chuck and turning it between centers for as long as I could. I parted it off just like I did the bowl in the DVD, and then sat down with my power drill and a handful of sandpaper.

Bill

Re: Maple Vessel (pics)

#9

Re: Maple Vessel (pics)

Bill Grumbine (Kutztown PA)

>Yes, Brian, correct, although there was no vacuum applied, since it would have sucked me right through one of the inclusions!

Bill

Re: Maple Vessel (pics)

#10

Re: Maple Vessel (pics)

George Van in WI

>Good to see you posting again Bill. That sure is a beauty! Great wood, great form and finish. Glad you were able to keep it together.

Re: Maple Vessel (pics)

#11

Maple Vessel (pics)

Terry Quiram, Roanoke Illinois

>Bill

What an amazing piece of wood. That is a wonderful shape and really shows grain well. It looks like your finish is only a buffing. Is that correct?

Terry

Re: Maple Vessel (pics)

#12

Re: Maple Vessel (pics)

Bill Grumbine (Kutztown PA)

>Thanks George and Terry. I have been here, just not had a lot to say or pics of work to post.

Terry, I gave it a good soaking in Watco, one coat like I usually do, and then buffed it. I am starting to experiment a little with some of Russ' techniques, but no experiments on this piece!

Bill

Re: Maple Vessel (pics)

#13

Re: Maple Vessel (pics)

Gerry in Maryland

>Very nice one Bill.

I think I remember seeing this stuff in the barn. Sure looks different in this pic.LOL Like the onion form and the bottom looks like a Buckhorn Burl to me.. Thanks for mention of Randy Privett's site. Neat tool source..

Gerry

Re: Maple Vessel (pics)

#14

Re: Maple Vessel (pics)

Mark Kauder, Phenix City, AL

>Beautiful Wood, and the bowls was beautifully done.

Mark

Re: Maple Vessel (pics)

#15

Gerry and Mark

Bill Grumbine (Kutztown PA)

>Hi guys

Gerry, this is the piece I showed you when you stopped by last week - the one which was about to go on the lathe.

Mark, thanks, that is high praise from you.

Bill

Re: Maple Vessel (pics)

#16

Re: Maple Vessel (pics)

RevDoug

>Absolutely a beautiful piece of wood and the turning work you've done is an example for all of us. Your finish looks great. Thanks for sharing it with us.

Turn 'em round,

Re: Maple Vessel (pics)

#17

Re: Maple Vessel (pics)

Bill Grumbine (Kutztown PA)

>Thanks Doug! I haven't seen your name for a while.

Bill