Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

knots/ finishing question

Posts

knots/ finishing question

#1

knots/ finishing question

Kevin Turner

>Just plowed though an unexpected knot in the bottom of a useable bowl.( meaning I hope someone will use it to aid in serving a salad ect... ) What should I seal the knot with.?? I usually apply a thinned out poly the afterwards I'll apply Clapham or my own beeswax/ mineral oil paste.

Thanks Kevin T in T Bay

Re: knots/ finishing question

#2

Re: knots/ finishing question

johnclucas

>The first thing I do is glue the know in place. Then I fill any voids with colored epoxy or ground sawdust and epoxy or sometimes CA glue. If it's a sticky knot, meaning it is bleading sap I seal it with shellac and then finish as usual

Re: knots/ finishing question

#3

Re: knots/ finishing question

Kevin Turner

>John, Is there any reason to be concerned about the epoxy in contact with food? I don't want to hurt anyone due to the finish. P.s. the knot is in birch. Black crusty , but seems stable. Thanks Kevin T in T Bay

Re: knots/ finishing question

#4

Re: knots/ finishing question

johnclucas

>Kevin Take this with a grain of salt because I'm not a chemist and don't pretent to be one. What I've read is that epoxy is basically a plastic once it's cured. If you did ingest the stuff it would simply pasCA glue. I'm not 100 percent sure about CA and I also don't think CA moves with the wood as well as epoxy. I have some pieces that I filled with epoxy that are many years old and still holding fine.

Re: knots/ finishing question

#5

Tanks der John

Kevin Turner

>