Re: Duplicator
Bill Grumbine (Kutztown PA)
>Hi RJ
I am in that crowd who has owned a duplicator. Keep in mind now, all you are about to read is my opinion. In the first place, duplicators are really only worthwhile for very high volume jobs or those where exact proportions are required. They can be made to cut smoothly, but there is always going to be touch up work required by hand for sharp details.
The good news is, you have an excellent duplication system growing right out of your shoulders. By using a template or a story stick, and engaging in a little bit of practice, you can be duplicating pieces you may have never thought possible. Will they be exact? No. Will they be good enough. Yes. Most people will never notice, and a significant number of those who do will appreciate the skill needed to get them that close. Only a few armchair whatevers will be critical and condescending.
I mentioned before that I had a duplicating lathe. I owned if for a while because I was solicited to do a very high volume job. The customer turned out to be a deadbeat, which I discoverd before spending money and time on materials, so I sold the lathe. I continue to duplicate parts on a regular basis. Again, with a little bit of practice, it is not that hard. If possible, it would be a good idea to get some hands on instruction in the techniques. The money you would spend on a duplicating device would better serve you as classroom money to expand your skills.
Good luck with it.
Bill