We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>Here is one of the latest bowls from a 200 year old magnolia that died and had to be put to rest. I have some roughed out that are in the 30" range. Just goes to show you that life is like a box of chocolates you never know what is beneath the bark!
Out of curiosity, how much could you sell a bowl or set of bowls like that?
Me, I'm total newbie to this. I don't even know if it's possible to get attachment for my lathe to do bowls with.
Mine is sorta a rig. It's one of those drill assisted lathes. An actual drill is the motor and head of the lathe.
I am new to the terminology. But I believe in order to do bowls I would need a plate with the four bolt holes. Not even sure how that works. But if your curious please look at the lathe I won on ebay and let me know if there is any possibility that I can turn some bowls or not.
>That's a really beautiful bowl. Do you know what type of magnolia that was? I got some magnolia from a tree my neighbor had removed, and the wood is quite light, with a very wide grain, almost like pine. I know it was a magnolia grandifloria because I've seen it for years, and watched them cut it down. I'm really intrigued with the grain pattern in your bowl. Scott
>This tree varied throughout the log. I also have bowls from the lower part of the tree that is light in color and wide grain. I can't explain why. The tree had been dead for over a year before it was cut. Then It has laid in my wood lot for almost 2 years before turning. This bowl had lots of red tint in it also.