Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Gast oil less vacuum pump cleaner

Posts

Gast oil less vacuum pump cleaner

#1

Gast oil less vacuum pump cleaner

Vicmarc.fan

>Gast has a decal on the pump which says to use a cleaner for best service. The stuff is almost $40.00 for a small aerosol can. Does anyone use this stuff or anything else maybe not so pricey. My pump started acting funny so I tore it apart today. The vanes look to be made of carbon and slide in and out of a groove in the head and are forced to the outside of the housing to make a seal. The unit was pretty well packed with a black deposit which I cleaned as best I could but because the housing is cast iron and machined I didn't want to use anything that would form rust. I have many solvents but I couldn't get the pump off the motor shaft I didn't use any because of the bearings. Just curious.

Ron

Re: Gast oil less vacuum pump cleaner

#2

Re: Gast oil less vacuum pump cleaner

albertaBob

>You are probably better off if you have knocked it down to replace the vanes while it's open.

If memory serves, the solvent(cleaner) is all or mostly Carbon tetrachloride.

I figure WD40 will do in a pinch but blow it dry before you re- assemble.

Regards

Bob

Re: Gast oil less vacuum pump cleaner

#3

Re: Gast oil less vacuum pump cleaner

Bob G.

>BrakeKleen or electric motor cleaner should be fine. Check any auto parts store.

Bob

Re: Gast oil less vacuum pump cleaner

#4

Re: Gast oil less vacuum pump cleaner

Vicmarc.fan

>Thanks for the tip about brake cleaner. It worked like a champ. No need to blow it dry. The stuff just makes the blank gunk rool off the inside of the pump.

Ron