Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Carter Guides??

Posts

Carter Guides??

#1

Carter Guides??

Mark Mandell - Gone Round In Jersey

>Anyone here use Carter guides on a JET 18" band saw? OEM's got smoked after 6 years (they owe me nothing), and am ordering a conversion set of 2400 Guideall's from Carter unless someone knows of better for the JET 18" machine.

Thanks

M

Re: Carter Guides??

#2

Re: Carter Guides??

John Lucas

>Mark I have Carter guides on my Delta 14. They came with the lathe. They are wonderful for resawing and such but suck for cutting green wood. The bearing outer race gets covered with green wood shavings and it makes the blade chatter. It's very hard to clean off. I would prefer my older steel guides for this purpose.

Re: Carter Guides??

#3

Re: Carter Guides??

Jim Shaver - Oakville, Ontario

>Hi,

I have Cater guides on my 15" General band saw. I really like them, they are fully adjustable to the bands I use and the run really quiet.

Take care,

Jim

Re: Carter Guides??

#4

Re: Carter Guides

Mark Mandell - Gone Round In Jersey

>Thanks, John,

Don't think that will be a problem for me as I don't use my bandsaw to cut green wood; that I leave to the Husky and the stihl. Never liked the quasi-euro rotating plate guides that came on the saw, but would not trash working parts just for better. $200 just for guides on a saw that cost me $900 is worth a pause to see if someone else knows any better. |:-}}

M

Re: Carter Guides??

#5

Check with Iturro

Bob Hackett

>

Re: Carter Guides??

#6

Re: Carter Guides??

Mike Schwing from Md.

>I have them on my 14" Jet and wish you had not made me realize that they cost about 1/3 of my saw.

However, the offered a definite and noticeable improvement to the fixed guides that were on the saw as it came from the factory.

Agree with the green wood comment - but you won't be using it for this anyway.