Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

"Must have" accessories for the lathe.

Posts

"Must have" accessories for the lathe.

#1

"Must have" accessories for the lathe.

Bob Dodge

>I'm becoming interested in turning lately, and was wondering what one needs in the way of "must-have accessories", to be well equiped as a "complete" turner(spindles/bowls/hollow-vessels, etc.)

I have virtually no experience with a lathe, but over the years, I've slowly been accumulating chisels(Sorby), a decent chuck(Strong-Hold), and finally a good lathe (2hp General 26020VFD).

I immediately bought the outboard turning bracket for the General, which allows for 24" swing over the bracket. Now I'm looking at a live-center, and was thinking of going with the One-Way. Would that be an improvement over the General's stock center?

For sharpening, I've just bought the Wolverine jig and Vari-Grind attachment, plus the diamond wheel-dresser for my 8" grinder(3450 rpm). I have several grits of white wheels(60/150), as well as various other aluminum-oxide wheels for the grinder. I also have a Tormek.

I'm interested in "steadies" at the moment, and the One-Ways look great. Perhaps a set of Jumbo-Jaws for the chuck. I have various jaw sizes for the Strong-Hold, and the "Wood-Worm". Would a "screw-chuck" be a worthwhile addition? Perhaps a drill-chuck? If so, what size?

I have yet to look at sanding options.

I'd also appreciate any comments regarding the One-Way MasterCut chisels, and the handles for those (17 1/2", or 12"), perhaps a "Martel Hook" too.

Face-plates are another consideration. I have at present, the two face-plates that came with the lathe(4" and 6"??) and several Delta face-plates (6"?). I'd like to make a large sanding disk for the lathe (18"-20") I have no room in the shop for a dedicated disk-sander. I can easily make an accessory sanding-table for mounting to the lathe bed. The sanding disk would probably be several layers of thick MDF with a laminate face, permanently mounted to it's own face-plate. Hopefully, that'll eliminate having to "true-up" the disk each time I re-mount it. The electronic variable speed will be very nice there. Is a 6" face-plate large enough?

I'll definitely be taking a course before tackling the lathe. I have some great books (Raffan/Conover/Darlow, etc) but I find those limited where "tool presentation" is concerned.(two dimensional view)

I realize my post is very "open" and vague, I'm looking for general guidance at this stage, but I would appreciate any words of wisdom you may have, especially where you have found that "perfect" accessory for whatever it is that "YOU" do. Maybe a good 24" tool-rest for turning spindles, or a particular brand or model of hollowing chisel, etc. Something you're "glad" you bought or made.

Thanks, Bob

Re: "Must have" accessories for the lathe.

#2

Re: "Must have" accessories for the lathe.

Jim Putnam

>Bob,it looks like you have a pretty good start on equipment. I bought a few things in the beginning that don't get used much because I spent too much time in the tool store and not enough time at the lathe.

Turning can take you in many different directions, pens, for example, will lead you to different accessories than would bowls. I'd suggest that you get started with the classes and start turning (and sharpening) As you learn and develop more specific interests, you can make choices on tools, accessories and instruction that will support your style and projects. Let your own real needs drive your setup and selection of equipment.

Actual experience will also help you choose and make the best of the publications by Raffan, Darlow and the others. Shopping, talking and reading are fun, but there seems to be no substitute for actual time at the lathe. Get some instruction for a good safe start and then cut some wood before you worry much more about tools and accessories.

Re: "Must have" accessories for the lathe.

#3

Re: "Must have" accessories for the lathe.

John Lucas

>Bob You didn't mention a curved tool rest or even another tool rest of different size than the one that comes with the lathe. www.bestwoodtools.com can help you there. They also have a keyless jacobs style chuck with #2 morse taper. I find that a very handy accessory and use it a lot.

Re: "Must have" accessories for the lathe.

#4

Re: "Must have" accessories for the lathe.

JamieDonaldson

>Bob- I strongly support the idea of taking a turning class before buying more tools. I don't know where you live, but you would have a wonderful time at the J. Campbell Folk School or Arrowmont and enjoy the food and fellowship with other beginner turners, and the cost of a class would be repaid many times over in the future. Come take my class at folkschool.org in January!

Re: "Must have" accessories for the lathe.

#5

JL

Re: "Must have" accessories for the lathe.

JL

>The Sorby steb center is a nice one for turning spindles. I think it is one of the better centers on the market. I like the One-way steady. I have the spindle steady, I am thinking about the bowl steady.

Re: "Must have" accessories for the lathe.

#6

Membership in a local club *LINK*

Phil Joines Krum, Texas

>They are the best place to get hands on help and good discution on "how to".


AAW chapter list

Re: "Must have" accessories for the lathe.

#7

Let`s see now...

Bob Hackett

>You`ll need a large bandsaw and a chainsaw and pick-up truck or stout trailer to gather wood.Lessons,lots of lessons and a chance to see famous demonstrators at work.You`ll want to try alot of different grind styles and different types of tools.Oh,and you`ll want to learn simple metalworking skills so you can make your own tools,rests,steadies,etc.

Then again you could just join the local turning club and get all that I just mentioned and more plus a chance to meet a whole bunch of great folks who share your new passion.

Seriously,there`s no better way to flatten the learning curve than to join a local club.Look at the AAW site for the chapter nearest to you.

Mainely,Bob

Re: "Must have" accessories for the lathe.

#8

ROFL!!!

Bob Dodge

>LOL, Bob, I LIKE the way you think ;-)). Gonna upgrade that lil' Delta 14 BandSaw o' mine, and a pick-up truck will be the icing on the cake, ;-))

All kidding aside, I'll definitely be taking turning lessons at one point. The closest club I know of, is roughly 60 miles away from me. (Montreal West-Island WoodTurner's Assosc.) I'm northwest of Montreal, and I don't know a single woodturner in my local area. I have to satisfy my curiousity mostly with books and web-surfing.

I bought a little Ryobi 36"/12" bench-top lathe 7 or 8 years ago, and it saw very little use in my very over-crowded shop, mostly to turn the occasional "round" piece for a project(spindle/dowel,disk, etc) I had very little practical use for the lathe with most of my work being "flat".(melamine cabinets, custom counter-tops, etc)

Whenever I'd go to a woodworking show, I'd always enjoy the turning exhibits, and thought of the lathe as a wonderfully creative tool. It was kinda comical buying a Strong-hold chuck as an accessory for that Ryobi, since it cost me almost three times what the lathe did, but in the back of my mind, I knew I'd eventually approach turning as a recreational passtime unto itself, so I always tried to buy what I perceived as quality accessories.

By the time I bought the General, I was really quite well equipped, and the main interest was bowls. This is why I ordered the outboard turning bracket. With the lathe being reversible, it just seemed like a great item to have. I could use the lathe as a dedicated bowl lathe.

My current shop set-up won't allow me the luxury of using the lathe in that fashion, and I'm hoping to have a dedicated turning area, in the not-too-distant future. As it is, I'll have to content myself with working between centers for now.(lathe parrallel to wall)

I have several chain-saws, my 14" Delta bandsaw w/riser, will probably meet 99% of my needs, and easy access to all the wood I'll ever need. A pretty good utility trailer as well (3500 lb axle)

The main reason I'm curious about accessories, is because I'm reasonably far away from access to those items. It's usually a "day trip" into Montreal to find something I'd need, and often , that involves putting in an order for something, and getting it a week later, and another day trip to pick it up. I like to be fully prepared and equipped when I take on a new project. When I start the lessons, I'd like to have any items I might need "on hand" in my shop, so I can come home and practice. The lessons are one evening per week, and I really have no idea what those first lessons will cover. Should be fun though.

All the best, Bob

Re: "Must have" accessories for the lathe.

#9

Re: "Must have" accessories for the lathe.

Bob Dodge

>Hi John,

Thanks for those suggestions. I hadn't even considered a curved tool-rest, so I'll look into that. As it stands I only have the 4" and 12" rests that came with the lathe. I'll be getting the 24" straight rest as well, for spindle work.

What capacity drill-chuck do you use? 1/2", 5/8", 3/4"? That's definitely a "must have". I've been thinking I might need a lamp auger as well, but I know very little about those.

Thanks again, Bob

Re: "Must have" accessories for the lathe.

#10

Re: "Must have" accessories for the lathe.

Bob Dodge

>Thanks JL,

I'll look into that Sorby steb center.

Those OneWay steadies sure are nice. I know I could make my own as well, but I get such a great price on those, it's hardly worth it to make my own.

Thanks, Bob

Re: "Must have" accessories for the lathe.

#11

Re: Membership in a local club

Bob Dodge

>Thanks Phil,

I'll check out some of those links. I know of two clubs in my general area. The Montreal West-Island Woodturner's Assosc(60 miles southeast of me), and the Ottawa Woodturners Assosc. (90 miles west) It's always a treat to watch those guys doing their thing at the woodshows. Very creative and talented individuals indeed.

Thanks, Bob

Re: "Must have" accessories for the lathe.

#12

Re: "Must have" accessories for the lathe.

Bob Dodge

>Hi Jim,

I agree 100% about proper instruction. There's only so much you can learn from books. I still lack "direction" at this point, but bowls seem attractive to me at this point. Hollow vessels as well.

My shop is going through an evolution at the moment, and that's taking time. I'm hoping by next fall, to have much more time to devote to turning. My main focus these days, is working with hand-tools. I'm trying to get away from working with flat panels,(melamine, MDF, laminates, etc) Once I've completed a decent joiner's workbench, I'll focus on the lathe.

All the best, Bob

Re: "Must have" accessories for the lathe.

#13

Re: "Must have" accessories for the lathe.

John Lucas

>Bob I've used a 3/32 to 1/2" drill for years but as soon as I get the money I'm going to buy the 1/16 to 1/2" keyless chuck from Bestwoodtools. That's the best chuck I've seen for the money. If your going to use big drills to start hollow turnings you would want at least 1/2"