Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Lacquer Smell

Posts

Lacquer Smell

#1

Lacquer Smell

Frank Martin

>I've been using lacquer lately to finish my turnings and have been very pleased, EXCEPT for the smell, which goes through the house. Been wondering if using the charcoal filter in my Jet Filtration unit would help kill the smell????? Anyone tried this? Results? If concensus is charcoal filter is a nogo does anyone have a suggestion for a finish which would give comparable results to Mylands sanding sealer, but without the smell?

thanks for any suggestions.

frank

Re: Lacquer Smell

#2

Re: Lacquer Smell *LINK*

Les Robison

>Try using water based lacquer, it has no smell. Available from Jeff Jewitt at Homestead Finishing. It is clear and leaves a slightly blueish tint. You can use a tint to give it the golden glow of nitro Lacquer.


http://www.homesteadfinishing.com

Re: Lacquer Smell

#3

Re: Lacquer Smell

Mike Schwing from Md.

>Frank, an activated charcoal filter will help pull the offensive fumes from the air it encounters, but plenty will still escape its grasp and your family (as mine) will still complain.

The fumes are from the carrier agent that evaporates rapidly enough to give the sanding sealer the nice properties you enjoy.

While water based lacquer will most defintely not create the (ob)noxious fumes, it does not have the rapid dry qualities you are looking to duplicate in the Mylands sealer. Frankly, there is nothing that will. (at least nothing of which I am aware)

Re: Lacquer Smell

#4

Re: Lacquer Smell

Pete in Holland, MI

>Years ago in my basement shop, I installed a squirrel cage blower (impeller about 6" diameter) in the ceiling, discharging thru a piece of dryer vent tubing and flapper thing out side.

Have spread many gallons of finish in that shop (12 x 22'). So long as the blower is on, there is virtually no hint of the solvents up stairs. Forgetting and turning it off will lead to all sorts of complaints.

Basis of the fan is that it keeps the air pressure in the shop slightly negative, reducing opportunity for smells, and saw dust, to make their ways thru the house.

Pete

Re: Lacquer Smell

#5

Re: Lacquer Smell

Earl Eyre

>Similar to Petes, I just have one of those square cheapy fans in the window. I shut the door to the shop, turn the fan on and it creates a fairly strong air current and pulls air under the door (it's not close to air tight) from the rest of the basement and out the window...no way odors or sawdust can get upstairs.

Without the fan setup and even with a filter---the odors still have to get from the lathe to the filter and in the process will disapate into the air and up the stairs.

Earl