Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

turning tool advice

Posts

turning tool advice

#1

turning tool advice

Patrick Capobianco

>I'm farely new to turning, I'm not sure which tools I should have, I have a 3/8" spindle gouge,a 3/4" roughing gouge, that are HSS. I also have a beginners set which is just carbon steel. What other turning tool should I buy that is in HSS such as parting tool, skew tool?

Re: turning tool advice

#2

Re: turning tool advice

Gary in Zirconia, NC

>First, it would help if we knew what you wanted to turn.

Re: turning tool advice

#3

Re: turning tool advice

Don Henthorn

>I'm kinda with Gary. I buy a tool when I have a need for it. Otherwise I don't need it.

Re: turning tool advice

#4

Re: turning tool advice

John Lucas

>I agree with the others. It's hard to make a recommendation without knowing what you want to turn. However it's difficult to find a turner who doesn't have a parting tool and 3/8 or 1/2 inch bowl gouge. If you think you want to do bowls or boxes a 3/4" round nose scraper is probably pretty handy. I'd skip the skew until you have more turning time under your beltl, although Nick Cook has started teaching people the skew in beginner classes.

Re: turning tool advice

#5

Re: turning tool advice

tdaniel

>The 8 piece set from harbour Freight is surprisingly good. I like the thin Sorby parting tool and a 1/2" Sorby bowl gouge for a larger lathe, the 3/8" for smaller lathes and a jig to sharpen it with. If you don't buy the jig don't buy the gouge.

Re: turning tool advice

#6

Re: turning tool advice

Patrick Capobianco

>I'm sorry I should have mentioned that. I'm in the process of making a pepper mill and salt shaker, so I will be making beads and tapers mostly.

Re: turning tool advice

#7

Re: turning tool advice

woodspinner/ Bill Hale

>I do about 90 % of my work with two tools, 3/8 and 1/2 bowl gouges.

My recommendation is to buy the Oneway Master cut system tools. Buy a long and short handle and the 3/8 and 1/2 double ended tools. You will also need the 3/8 adaptor. These tools are heavy and I believe more controllable. May be a little pricy but worth the cost.

Good turning and be safe

Bill in Casa Grande, AZ.

Re: turning tool advice

#8

Re: turning tool advice

John Lucas

>Patrick In that case I would suggest a parting tool and if you want to learn to use the skew that that is a good choice. I would use the skew a lot on pepper shakers. My best friend has turned hundreds of them and never uses the skew. He likes his spindle gouge. To each his own.