Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Chip containment Shield--demonstrating

Posts

Chip containment Shield--demonstrating

#1

Chip containment Shield--demonstrating

Robert Savit

>Does anyone have any experience with transparent shields to contain chips while turning in public? I will be using a Jet minilathe, probably on the Jet stand, turning "magic" wands in the lobby of a movie theater (guess what they'll be showing), and I'd like to keep the chips from flooding the lobby.

All suggestions welcome.

Thanks,

Bob Savit

Re: Chip containment Shield--demonstrating

#2

Re: Chip containment Shield--demonstrating

CapeMayMike

>Last year several of the demonstrators at Totally Turning were using the type shields that you describe. They appeared to be constructed in a very straight forward manner. As I recall, a single "sheet" supported by a wood upright on either side, with the entire deal placed behind the lathe. Keith Tompkins whose AAW chapter does the Totally Turning symposium can probably shed more light on this.

Re: Chip containment Shield--demonstrating

#3

Re: Chip containment Shield--demonstrating

Charles Bjorgen

>The Minnesota Woodturners Association, the club of which I'm a member, has two lathe shields used for public demonstrations. Here's photo of one in use at a St. Paul Woodworkers show in 2004. The guy at the lathe is Bruce Arones, recent club president.


img

Re: Chip containment Shield--demonstrating

#4

Re: Chip containment Shield--demonstrating

JamieDonaldson

>I have been trying to give away the ideal shield for this job! I have about 30 old golf cart windshields made of shatter resistant Lexan, but the shipping is the hold-up! I would give them to anyone who will pick them up in Lexington KY area.