Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Oliver 53 lathe and controller

Posts

Oliver 53 lathe and controller

#1

Oliver 53 lathe and controller

Brian McInturff

>Hi guys,

Have an old 1923 Oliver 53 Lathe which had the DC motor version on it. I'm looking for an ac headstock that would fit or a controller for the 53. Mine is missing the controller. Luckily this isn't my only lathe but would like to get it into operation.

I've checked OWWM and no luck there(I'm a member there also).

The 53 will give me a little more swing capacity than my Oneway 1018 does. Any help would be appreciated and possibly rewarded. Thanks, Brian

Re: Oliver 53 lathe and controller

#2

Re: Oliver 53 lathe and controller *LINK*

Phil Joines Krum, Texas

>Just about any DC controler sized for the voltage and current of the motor would work. One place to contact is Dealers Electric


http://www.dealerselectric.com/