Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

quick question on shellac and oil+

Posts

quick question on shellac and oil+

#1

quick question on shellac and oil+

GaryG in MD

>I know I could find the answer to this question if I looked in the archives long enough, but all I want is a quick, simple reply.

I use shellac (spray or brush on, depending) to seal pieces during turning breaks (like overnight) and sometimes also on roughouts before drying. Some of this probably sinks in below the level of subsequent finish turning in various places. I would like to know what effect this will have on a subsequent application of an oil or oil/varnish, say like Watco Danish. Will the Watco just go through the shellac, or is it going to cause problems with color variation or whatever? I know that some people use shellac as a sanding sealer, so I'm guessing it will work ok, but I'd like confirmation before I mess something up.

Thanks for your replies,

Gary

Re: quick question on shellac and oil+

#2

Re: quick question on shellac and oil+

Russ Fairfield

>The shellac will seal the wood and eliminate the dark spots and blotchy appearance that is caused by the difference in penetration between end and flat grain. I do the same thing with lacquer, because mixed shellac has a short shelflife and lacquer doesn't.

Re: quick question on shellac and oil+

#3

Re: quick question on shellac and oil+

GaryG in MD

>Thank you, Russ; glad you were reading and responded.

I'm pleased with your answer too. Looks like I'm on the right track.

I know what you mean about shellac; I used some old stuff once (on an antique oak hall tree), and it took two years to dry. ;-) I'll never use old shellac again!

Cheers,

Gary

Re: quick question on shellac and oil+

#4

Re: quick question on shellac and oil+

Kevin Turner

>I do the same with shellac, as a sanding sealer too. But I beg to differ the point of lacquer. I was told that it did have a shelf life. ( At least the one I used for the dinningroom table.) Unless I was using a different type than what Russ is indicating...Be careful...KevinT

Re: quick question on shellac and oil+

#5

Re: quick question on shellac and oil+

Russ Fairfield

>To clarify what I said.

All finishes have a shelf life after the can is opened. Some are just shorter than others. I should have said that "I use lacquer because it has a longer shelf life than shellac." Mixed shellac has a shelf life of several months, while a can of a good quality nitrocellulose lacquer such as Deft has a shelf life of several years. One is Short, the other isn't.

If I mixed a quart of shellac, it would die of old age before I could use all of it. I can buy a gallon of Deft, and it is good to the last drop, even if that takes several years.

Re: quick question on shellac and oil+

#6

Re: quick question on shellac and oil+

Kevin Turner

>Thanks Russ, After I read your post....I caught myself scratching my head, wondering.... Now it makes sence..Thanks KevinT in T Bay