Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Wow! What a difference!

Posts

Wow! What a difference!

#1

Wow! What a difference!

Carole in VA

>First piece of wood on the new lathe was some punky maple limbwood just to get a feel for the machine. Runs smooth as a kitten and I love the VS. Much smoother cuts. Don't care for the toolrest but I think that is because I am just not used to the angle or to the height of the lathe. This one is at the 90 deg elbow level while the Jet was lower. Just need to get used to it. Too tired to try any serious turning tonight, but tomorrow is another day!


img

Re: Wow! What a difference!

#2

Re: Wow! What a difference!

Don Henthorn

>Oh, Carole. That does look nice. That outboard turning setup look promosing as well. Can't wait to see what comes of that dude in the future.

Re: Wow! What a difference!

#3

Re: Wow! What a difference!

JamieDonaldson

>It will take you a while to become accustomed to the speed controls , but have a BALL!

Re: Wow! What a difference!

#4

Re: Wow! What a difference!

georgetroy

>You made a good choice with your new machine. Enjoy

Re: Wow! What a difference!

#5

Re: Wow! What a difference!

Bill Stehman ... Sierra Vista AZ

>Excellent choice, I have enjoyed mine for two years now but imidiatley upgraded the tool rest to BestWoods Tool's full array of tool rests. Not cheap but well worth the investment. Enjoy.. Bill

http://bestwoodtools.com/

Re: Wow! What a difference!

#6

Atta Girl!

Jorge Castaneda

>Congratulations Carole,

That looks like it will tackle many jobs, with that outboard and the swivel head you are going to get spoiled. Have fun! Did that stand came with it or had to be bought separately?

Looking forward to see what comes out of it.

Jorge

Re: Wow! What a difference!

#7

Purrrrrrrrr....

Jim Shaver - Oakville, Ontario

>....Fect Carole,

bet you stay up late playing...

Good for you!

Take care,

Jim

Re: Wow! What a difference!

#8

Re: Atta Girl!

georgetroy

>That looks like a Woodcraft stand to me.

Re: Wow! What a difference!

#9

Re: Atta Girl!

Carole in VA

>George is correct. It is a Woodcraft stand. It will be temporary. The lathe wasn't supposed to arrive until the end of October so I thought I would have plenty of time to design and build a custom stand. NOT! I wasn't going to have the lathe sit in the box for a couple of weeks while I figured out what I wanted and built it! LOL I also think the big white oak beams I want to use need a few more months of drying time.

Re: Wow! What a difference!

#10

It's way too shiny

Earl Eyre

>Take some oil, shellac, CA glue and a little paint, mix it all up and throw it at the lathe. Then take some tools, scrape up the paint, hit the lathe a couple times with a chain: now you have a lathe. :) I know it won't be long and that's the way your beautiful new machine will look. Congratulations!

Earl

Re: Wow! What a difference!

#11

Re: Wow! What a difference!

Ed Karch in No.VA

>You are gonna have fun with this. How do you get a shop with that much space? Looks like you could actually move around without falling over something.

Re: Wow! What a difference!

#12

Serious contender

Jay in TX

>Excellent Carole! The DVR was my close second in the race to upgrade. It only lost the battle because swing was king, but at a price. That oak beam stand you're planning will be the coup de gras.

Re: Wow! What a difference!

#13

Keith Tompkins

Re: Wow! What a difference!

Keith Tompkins

>Hi Carole, great news! Once you get used to a vs lathe, you won't be happy with anything less. I have used the Nova lathes, and am not crazy about the tool rest either. There is no groove to slide your hand along.

I wonder....would you mind (when you get a chance) giving me the measurements of the outboard rest? I have designed an outboard rest for my general, it looks remarkable similar to the nova....I want to adapt the nova rest to my general. It would be easy to make an adapter plate, and longer tool posts...hmmmm. thanks, Keith

Re: Wow! What a difference!

#14

Looks Great Carole!

Jennifer@Indy.USA

>Carole what a beauty! Can't wait to see what you create on it!

Congrats to you....you deserve it!

Jen :)

Re: Wow! What a difference!

#15

Drool!!! Oh, excuse me, please

Carol Reed, the Router Lady, Dubuque

>hand me a towel.

Re: Wow! What a difference!

#16

Re: Wow! What a difference!

DD

>You will love that lathe. What version of firmware came with it, if you don't mind me asking? When it first starts, it provides the version number on the speed read-out. It is likely something like 4.xx.

DD

Re: Wow! What a difference!

#17

Dick Hines

Re: Atta Girl!

Dick Hines

>You have hit the big time now. All you have to do is paint it mustard yellow and you will first class.

Can't wait to see what you turn on it.

Re: Wow! What a difference!

#18

Re: Wow! What a difference!

Carole in VA

>4.54xS03 I am assuming that is the latest.

Re: Wow! What a difference!

#19

Measurements

Carole in VA

>Keith, not sure which measurements you want. It's sort of hard to get them exactly once it is mounted. The toolrest post is 10" from the arm up. The arm is about 14 1/2". The curved part that attaches to the lathe is approximately 7" x 4 1/2". I know that's probably not much help, but if you tell me exactly which measurements you want I can get them.

Re: Wow! What a difference!

#20

Re: Hey Keith! Want to buy...

JamieDonaldson

>a real outboard turning bed and banjo? I can post a photo, but you get to pay the shipping for the cast iron! Let me know if you're interested.

Re: Wow! What a difference!

#21

Re: Wow! What a difference!

DD

>Thanks. Been trying to find out how one can upgrade the firmware (I have 4.22) because of new features being added through the firmware. No luck yet with Teknatool.

Re: Wow! What a difference!

#22

Keith Tompkins

Re: Hey Keith! Want to buy...

Keith Tompkins

>Whatcha' got, Jamie! Please, post a photo.........

Re: Wow! What a difference!

#23

Re: Wow! What a difference!

Carole in VA

>It's a flashable EPROM, but I reckon it has to be done by a technician? Maybe there is a port on the board they can hook up to. Did you try and contact Tim Geist?

Re: Wow! What a difference!

#24

Re: Wow! What a difference!

DD

>Teknatool are apparently looking at ways to permit the upgrading of the firmware but are not expecting to have any type of procedure/process available for end users for about a year. I purchased my DVR slightly less than a year ago (@ version 4.22) and in that time the firmware has been upgraded to at least 4.54 (your version). There is nothing on the Teknatool website that describes what new features have been incorporated for any particular version of firmware. However, if you watch the video on the Teknatool website on the DVR, the shot of the DVR display looks like verion 4.51, which has 5 programmable set-points for operator-slectable speeds. It's good to see they are continuously improving the firmware and feature set. I just wish they could figure out how to upgrade existing customer DVRs.

One thing that surprised me about the DVR was the need for a surge supressor to protect the electronics. Finally bought one and it actually works out to be quite useful to plug in other devices (lamps, drills, etc) right at the lathe bench as opposed to running extension cords across the floor. Given where you live (eastern Virginia, I think), and the amount of electrical/thunder storms you have in the area, you may wish to consider getting one of those surge suppressors. Seems to be a worthwhile investment to protect a major investment!

Doug

Re: Wow! What a difference!

#25

Re: Wow! What a difference!

Colin Spencer

>Carole

I have had mine for about 6 weeks now and agree that it is a very smooth machine in comparison with my old lathe. I have yet to explore the larger sizes only having small blanks at the moment, must go to buy some big ones soon. My home made bench weighs some 150+ kilos plus the 100 of the lathe. I am sure that your Oak beams will add some considerable weight but make sure that it is heavy enough if you are going to do some 29 inch turning with the outboard rest. I can add some more sand to mine if necessary.