Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Loosing Interest in Woodworking (Magazines)?

Posts

Loosing Interest in Woodworking (Magazines)?

#1

Loosing Interest in Woodworking (Magazines)?

Mark Kauder, Phenix City, AL

>How many of you, once you started woodturning, lost interest in other woodworking, except where it could help your woodturning?

It started slowly with me, but I used to subscribe to every woodworking magazine under the son, but these days, I only subscribe to one or two. Now I can go to Walmart, and look at the magazine there, and walk away without a single one, unless they have some article that has skill transferable to woodturning.

Most of my regular "Flat" woodworking now, is either home repair, or building a new rack for my turning tools.

Just wondered about the rest of you.

Mark

Re: Loosing Interest in Woodworking (Magazines)?

#2

Re: Loosing Interest in Woodworking (Magazines)?

Ed Karch in No.VA

>Exactly the same right down to the tool rack.

Re: Loosing Interest in Woodworking (Magazines)?

#3

Re: Loosing Interest in Woodworking (Magazines)?

Ron in Drums PA

>Same here. I have a stack of unread flat woodworking magazines that came in the mail.

My problem is SWMBO has too many flat projects for me.

Re: Loosing Interest in Woodworking (Magazines)?

#4

Re: Loosing Interest in Woodworking (Magazines)? *LINK*

Craig Daymon

>I know I've let my American Woodworker subside, but I should have done that long ago.

If you want the best of both worlds with GREAT articles, photos, usually a good turning (or useful to turners) article and frequent strong carving articles, check out Woodwork Magazine. Same print quality as Fine Woodworking, but a bit more of an 'art' leaning. Get a preview at their site. Link below.

-Craig

(This is my current favorite Woodworking/turning/carving magazine...especially based on inspirational content.)


Woodwork Magazine

Re: Loosing Interest in Woodworking (Magazines)?

#5

Re: Loosing Interest in Woodworking (Magazines)?

Harvey Meyer in Atlanta

>Same here. I used to get every WW mag. Now I only get turning mags. I haven't done any flat work in 4 years (with 1 small exception). As far as shop tools are concerned - most of the stuff either collects dust, or if it has a horizontal surface, it collects turning blanks or turning related stuff. I used to covet routers and mortisers - now I long for more hollowing tools. I used to go to WW shows, now I go to turning symposia or demos. So in my world - round is in and square is out.

Harvey

Re: Loosing Interest in Woodworking (Magazines)?

#6

Re: Loosing Interest in Woodworking (Magazines)?

John Lucas

>Mark I don't read all the articles as closely as I used to but I still get almost all the magazines. I never know when I'll learn something really cool while reading an article. There are some sharp people out there. It may seem like just another boring article on how to make a dovetail but if you read closely you'll find that the author has some neat little trick up his sleeve that makes the article worth while.

I have dropped a few over the years. I'm simply running out of room to store them. My favorites are Fine Woodworking and Woodwork. Sometimes Wood magazine has something really good. Of course I get as many of the woodturning ones as I can afford.

I've been a subscriber to Woodsmith and Shopnotes since issue One. I don't get as much good info from Woodsmith as I used to but Shopnotes will come up with a good tip almost every issue.

Re: Loosing Interest in Woodworking (Magazines)?

#7

Yup, me too Mark.

Molly Winton

>

Re: Loosing Interest in Woodworking (Magazines)?

#8

Saturation Effect

Jim Shaver - Oakville, Ontario

>Hi Mark,

I agree with you about this too. I have been woodworking about 8 years now (man time flies!).

I used to buy everything to satisfy my need to learn about woodworking, tools etc. After awhile you kind of find your own groove and some magazines are not that tasty any more. Then your skills develop to a point where the instructional magazines are not needed as much...soon you whittle your self down the real few that count for you.

Being a woodworker and turner I find a few magazines "fit" my needs these days. I enjoy FWW and Popular WW, Woodcraft Magazine is really nice and I like Wood Turning Design.

It's a natural eveolution of your skills and interests that boil down your magazine choices, and some of them are expensive!

Take care,

Jim

Re: Loosing Interest in Woodworking (Magazines)?

#9

Keith Tompkins

Re: Loosing Interest in Woodworking (Magazines)?

Keith Tompkins

>HI Mark, excellent post! Too many woodworking mags are geared to the neophyte wood worker. There are only so many table saw comparisons and orbital sander reviews a reader can take!

For a while, I stopped reading Fine Woodworking, it seemed they were trying to cater to the novice, including articles on biscuit joinery, etc. Luckily, they seem to have seen the error of their way.

Woodwork is my favorite, I like the interviews with other woodworkers, as well as the articles. ( Plus, John the editor gave my stuff two full pages!) I do only original cabinet and turning work, so the mags with plans were never any interest to me.

I like all the turning magazines, I cannot afford the English magazine, so only buy the issues that really pique my interest. I read lots of carving mags, as they inspire me to add some carving details to my turning.

Re: Loosing Interest in Woodworking (Magazines)?

#10

Re: Loosing Interest in Woodworking (Magazines)?

Barbara Gill, Remlik VA

>I only do flat work now if I don't have a choice which is almost never. If I had started with woodturning I would have saved a lot of money.

Re: Loosing Interest in Woodworking (Magazines)?

#11

Re: Loosing Interest in Woodworking (Magazines)?

albertabob

>Like most, I make the monthly trek to the new stands hoping for some new article or well laid out plan I can play with for a few days or weeks.

I have made most of the silly things so we are topped up with nick nacks and bricka bracks, candle sticks, rolling pins, fountain pens and animal shaped clocks.

I have my eye on a half dozen pieces of fine furniture that I sill want to make for the heck of it.

The magazines are by and large focused on the entry level consumer and the articles leave very little for a fellows with 3-5 years under his belt.

I just think that maybe we aren't the market.

Thats' O.K. but it makes reading a bit of a bore.

Cancelled my subscriptions about 3 years ago.

Bob

Re: Loosing Interest in Woodworking (Magazines)?

#12

Re: Loosing Interest in Woodworking (Magazines)?

RK in Milw

>I just head over to Barnes & Noble, grab a Starbucks and skim through them for free:)

Re: Loosing Interest in Woodworking (Magazines)?

#13

Flat stuff FOR the round stuff..

Peter Teubel

>I have been quite busy with my job lately, so the lathes have gone pretty much unused. I am spending what little free time I have building cabinets FOR my turning shop. The goal is to get everything possible off the floor and everything PERIOD behind doors. This will make cleanup alot easier and keep things organized. So I've been building up my skills in basic cabinetry (nothing fancy...simple plywood carcass construction with hardwood panel doors). Its a refreshing change from round things, but it take ALOT longer to see the results.

Re: Loosing Interest in Woodworking (Magazines)?

#14

Re: Flat stuff FOR the round stuff..

oldgriz

>YUP, the turning bug got me bad also

I used to be a hard core scrollsaw person... wrote articles for Scrollsaw Workshop and Creative Crafts magazines... now about the only scrolling I do is Christmas ornaments for my craft booth.. I still design patterns, but they are mostly cut by customers and friends...

Woodturning is a disease.. LOL.. a pleasant disease and addiction...

The only magazines I subscribe to anymore are turning magazines... the rest I pick up at the book store if I see an interesting article

Re: Loosing Interest in Woodworking (Magazines)?

#15

Re: Loosing Interest in Woodworking (Magazines)?

Bruce in Saint John, N.B. Canada

>I cancelled a few of mine (flat work mags) but not them all. A couple of times a month I take a hike over to the local public library and check the mags out. If something looks interesting I either read it there or bring it home to read. Current mags can't be taken home, one has to wait for a new issue to come out before taking them home. When you take it home you have the advantage of being able to copy the article if so desired. I have a couple of binders full of articles in my archives.

Bruce in Saint John, N.B. Canada

Re: Loosing Interest in Woodworking (Magazines)?

#16

Not Me!!!

Thomas Skaggs, Foothills of Mount Level

>Mark,

Perish the thought man! Ohh...but then again, I am a furniture maker and not a turner. heh heh heh....

So would you rather be reading what's in the other magazines? I guess you could subscribe to other mags and keep up with what's happening in Washington D.C., or maybe know the latest about Madonna, or find some really great biscuit recipes. I bet Martha's mag is so much better now that she has re-invented herself. ;-)

I think I'll hang tight with the wood mags for now. I'd hate to resort to reading other things and find myself hooked on something like scrapbooking. Hee hee!

Tommy

Re: Loosing Interest in Woodworking (Magazines)?

#17

Browser...

Jay in TX

>I used to like to browse them all. PW, WWJ, FWW, Wood, etc. I bought a mass subscription from some begger (girlscout, boyscout, highschool fundraiser, whatever) sometime ago and have been letting them elapse. If it hasn't been covered in the hundreds of issues I have, then I'm sure to find it here on the boards, or at least hear about it so I can find the issue at a local retail establishment. I'm still interested in building flat stuff, but only on a want-to (or dire need) basis. You can only read so much about basic joinery; it only gets bad when tricks and tips start repeating themselves!

Re: Loosing Interest in Woodworking (Magazines)?

#18

Ditto for me.

Jennifer@Indy.USA

>Mark,

I think it was last year I added up the cost of all of my subscriptions to WW'ing mags and it came to some rediculous price of nearly $300.00 a year. It was nuts. The worst part was I hardly read them. Unless, like you say there was something regarding W'turning. Now I'm down to Woodturning Design, Woodworks, and a free supbscription to Popular Woodworking that I won in the raffel at Ray's party last spring, and I have to admit I recently subscribed to Woodworker's Journal just to read Betty's article every issue. I don't really care for the magazine, and I can't stand their relentless mailings. I probably won't continue that one. I'll just read her article off the news stand. And of course there's American Woodturner but that's a given with the membership to AAW. I boxed up about 100+lbs of old magazines and hualed them down to the local High School wood shop. They were thrilled : )

Jen

Re: Loosing Interest in Woodworking (Magazines)?

#19

What's wrong with scrapbooking???

KurtK in Indy

>Or knitting or macrame....don't get me started!! I have to keep my hobbies in check or else I wouldn't have time for my day job...

That reminds me....I should be getting those power carving bits I just ordered for putting texture to my turnings.....THANKS A LOT JEN!!!

Going back to work now.

Kurt

Re: Loosing Interest in Woodworking (Magazines)?

#20

Re: Flat stuff FOR the round stuff..

GeeSeaWhy

>Flat work not only takes longer, mistakes are often more costly to recover from. And it takes a lot more space. I had little enough space to begin with but now that every available surface is covered with turnings at various stages of completion...

Graeme

Re: Loosing Interest in Woodworking (Magazines)?

#21

Re: Not Me!!!

Mark Kauder, Phenix City, AL

>I knew that you would answer like that, Tommy.

What other reading - no time. If I have time for recreational reading (usually 20 minutes at bedtime) it is politics or History. I do listen to plenty of books on tape while in the shop, but then again, mostly politics or history.

Keep up the fantastic furniture work, buddy.

Mark