No-kit yo-yos...
Ed Davidson (Colorado Springs)
>Made some one-piece (no-glue) yo-yos today. Hope you like them.
Putumuju with black dyed veneer laminations:
Padauk:
Bloodwood:
Yellowheart:
Best regards,
Ed D.
Knowledge You Can Build On — Est. 1998
No-kit yo-yos...
Ed Davidson (Colorado Springs)
>Made some one-piece (no-glue) yo-yos today. Hope you like them.
Putumuju with black dyed veneer laminations:
Padauk:
Bloodwood:
Yellowheart:
Best regards,
Ed D.
Re: No-kit yo-yos...
Keith Tompkins
>Very nice work, Ed. I imagine the work must be exact, o/w the yo yo's would lean to one side when in use.
Re: No-kit yo-yos...
Michael Stadulis, in Gloucester County, NJ
>Ed, Verrrry cool. Like them all, but I have to admit, that I think the yellowheart would be the one that I'd buy.
Mike
Re: No-kit yo-yos...
JKJ in East TN
>Wow! The one with blue and gold grabs me. Hard to imagine a more perfect "complimentary color" scheme (as defined by the color wheel) in an object made from wood. What is the blue material?
Just wondering, are you the turner formerly known as YoYoSpin?
JKJ
Re: No-kit yo-yos...
Ed Davidson (Colorado Springs)
>Keith,
Yes, that is the key...the two halves must be identical or the yo-yo will wobble. The wood's grain has to be pretty uniform to avoid wobblers as well.
best regards,
Ed D.
Re: No-kit yo-yos...
Ed Davidson (Colorado Springs)
>Thanks Mike...I almost didn't post the Yellowheart one, thinking the colors were too wild.
best regards,
Ed D.
Re: No-kit yo-yos... *LINK*
Ed Davidson (Colorado Springs)
>JKJ,
The blue stuff is from a special run of o-rings a buddy of mine had made for a limited edition aluminum CNC milled yo-yo. And yes, YoYoSpin is me :-)
best regards,
Ed D.
Frank's Aluminum yo-yos
Yo-Yo o-rings...why?
Ed Davidson (Colorado Springs)
>BTW, there are four distinct reasons for those o-rings on all my yo-yos…anyone want to take a shot at naming them?
best regards,
Ed D.
Re: Yo-Yo o-rings...why?
Keith Tompkins
>1. protection if the yo yo hits the floor. 2. color contrast. 3. they look cool, add a finishing touch. 4.You have access to lots of o-rings. How'd I do?
Re: Yo-Yo o-rings...why?
EdSnow
>Big o rings on a plastic or aluminum yo provide greater mass at the rim for greater inertia to keep you sleeping longer. They help your grip. They help it bounce.
I guess on yours, if they are super smooth inside they would not offer a lot of catch but you could jump start it by angling the string on the retrieve.
On my cherry bomb they are only there for weight. I sure wish it wasn't broken the poor adjusta gap has plain worn out and it did not bounce so well off the concrete.
3 out of 4...not bad
Ed Davidson (Colorado Springs)
>Nice work guys...here are the four reasons for o-rings:
1. They add weight to the outer rim, causing the yo-yo to spin faster and to help the balance...somewhat offsets a wobbler.
2. Provides a cushion if the yo-yo hits the ground...anti-ouch device.
3. They look good.
4. And most important (for me)...the o-rings fill the outer rim groves I use as a self-centering tool when reverse-chucking the yo-yo in my dovetail-jawed chuck.
Best regards,
Ed D.
Grip, splinters, looks, wear?
steve antonucci
>