Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Maple burl platter

Posts

Maple burl platter

#1

Maple burl platter

Mike Schwing from Md.

>13" wide, absolutely spectacular piece of maple burl. Hope I did it justice. Tried to keep a nice simple, clean form so it wouldn't compete with the real star of the show. Had to epoxy it together at that big bark inclusion, started to come apart and wobble.

Finished by sanding to 4000 grit with Abralon pads, then sprayed a couple of thin coats of lacquer and then rubbed it back to 4000 grit. Nice, low sheen, supple finish.

Might have to buy another pallet full of maple burl after seeing this one that I roughed from very wet status on 3/19/05. Comments welcomed and thanks for lookin'!


img

Re: Maple burl platter

#2

Re: Maple burl platter

Ed Kelle

>Jeez, another amazing piece. I don't know how you manage to do all these works. I don't think anyone can keep up with you.

I need to be like Mike. Gonna head out to get the new Nike Air Schwing Workboots.

It's gotta be the shoes!

Re: Maple burl platter

#3

Re: Maple burl platter

Jim King

>That is exceptional.

Re: Maple burl platter

#4

Re: Maple burl platter

Sascha

>awesome!!! where oh where do you get that kind of burl???

I have to hit EBAY again

sascha

Re: Maple burl platter

#5

Lovely!

Carole in VA

>That's gorgeous, Mike!I have yet to try burl of any sort. Is it hard to turn? Looks like it would be.

Re: Maple burl platter

#6

Re: Maple burl platter

Dale Cook

>I always enjoy seeing your work. This one is simply beautiful!

Re: Maple burl platter

#7

Gorgeous Mike!!

Molly Winton

>

Re: Maple burl platter

#8

Re: Maple burl platter

Jim Shaver - Oakville, Ontario

>Hi Mike,

Stunning...what can I say, I love this one!!

Take care,

Jim

Re: Maple burl platter

#9

Re: Maple burl platter

Dave Winters, Steamboat Springs, CO

>Mike, beautiful.

Re: Maple burl platter

#10

Re: Maple burl platter

GaryG in MD

>That's gorgeous Mike. Would you mind sending a side view? Thanks. ...Gary

Re: Maple burl platter

#11

Re: Maple burl platter

Dave Peebles Lyons, Ohio!

>Hi Mike,

Another beauty!! Is this some of Tim's stuff? Looks great!!

Best wishes,

Dave

Re: Maple burl platter

#12

Re: Maple burl platter

Mike Schwing from Md.

>Thanks Dave. Thanks everybody. Dave, that is Tim's stuff. I'm preparing to buy another 1000 pounds of it, actually.

For anyone interested, the gent's name is Tim Shipp, and his number is 541-367-3495. He is in Sweet Home, Oregon. Be prepared to have your ear talked off! Please tell him I sent you, it does help me actually.

Re: Maple burl platter

#13

Re: Maple burl platter

Tim Grenville-Cleave

>STUNNING !!!!

T

Re: Maple burl platter

#14

Re: Maple burl platter

Bernie

>Mike,

Very nice I have used Tim,too

Re: Maple burl platter

#15

Re: Maple burl platter

Ben Aragon

>Mike,

Great looking platter the grain is incredible.

Ben

Re: Maple burl platter

#16

Steven Antonucci

Naturally dried?

steve antonucci

>I've turned some very wet wood, and wondered if you just let it air dry or used one of the techniques (LDD, DNA, ...) to get it dried in 6 months?

My experience with burls has been that they tear themselves apart if I try to air dry, or warp so badly that I end up with a very small plate. How did you get it to dry "cleanly"? (I have an alcohol soaked white oak crotch platter that still twisted itself silly...)

Steve

P.S. good looking platter...

Re: Maple burl platter

#17

Re: Naturally dried?

Mike Schwing from Md.

>Steve, I guess we have very different experiences! This was very wet when roughed. I find big leaf maple burl to be pretty stable when drying as there is no real grain orientation in a severely burled piece like this. I wax the whole thing, all surfaces, using a thin coat of Anchorseal. I date it, and when it "feels" dry - using how heavy it feels to me and if it is cold when I put my cheek to it, I turn the wax off of it and true it up. I then set it aside for a few weeks and let it perform any remaining movement it has in mind. Then it is turned to final shape/size.

Re: Maple burl platter

#18

Steven Antonucci

Never tried it with Maple, but I have with Oak and

steve antonucci

>Birch, and the resulting mess has been disheartening. I spent hours logging a 200 year old white oak that fell in a storm (with a 14" saw), and had a 30" crotch that I followed your regimen on (very similar and unscientific). The birch burl was on the ground at the sawyers for at least 3 years when I bought it, and it's been challenging to preserve it from tearing itself apart. The two cherry burls I turned earlier this year were fine.

My observations have been that the wetter and more figured the wood, the more likely I will end up with smaller projects. I have a 28" cherry crotch on the ground, and I'm debating the whole platter stock vs. 6-10 12" bowls thing.

I had hoped that you had a magic recipe for drying wider stock, but I guess it might just be the nature of the maple you get?

steve

Re: Maple burl platter

#19

Re: Never tried it with Maple, but I have with Oak

Bob Hackett

>It`s been my experience that oak is best either turned thin and left to warp.It can also be left in a rather primative piece and if you plan to have some checking.figured birch,beech,hard maple and ash work much the same way at least up here in Maine.

Surprisingly both freezing and boiling seem to lessen problems but don`t eliminate them.

I`ve had good luck turning both oak burl and stumpwood in thin walled pieces and then microwaving.It ends up with the same effect as the madrone baskets the Christian Burchard makes,a nice natural texture and feel.

BTW-The burl that Mike turned is western bigleaf maple.Considered a soft maple it`s far more stable and easier to dry than oak or hard maple.

Mainely,Bob

Addy protocol-Over 15 years personal experience cutting,milling, turning and drying local timber.Combined with my brothers we have over 40 years.