Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Chuck help

Posts

Chuck help

#1

Chuck help

Tony Augruso

>I have the 26020 20" general lathe and I'm now looking to add a chuck to this lathe. I've been looking at the oneway chucks. Is there any reason not to purchase their largest chuck, the stronghold? Is the talon good enough?

Is there another chuck that I should consider?

Thanks,

Tony

Re: Chuck help

#2

Re: Chuck help

Ed Karch

>If you are looking to do big stuff on that 20" go for the big chuck.

Re: Chuck help

#3

Re: Chuck help

John Lucas

>Tony I would go for the big chuck even though I've turned 19" bowls with my vicmarc 100 which is about the same size as the talon. I'm probably pushing my luck.

Re: Chuck help

#4

Russ.....

W.C. Turner

>has a good article on buying chucks. Look at the menu on the left of main page.

W.C.

Re: Chuck help

#5

JL

Re: Chuck help

JL

>The Oneway Stronghold should do you quite nicely. The Vicmarc is also good. The Oneway Talon would be good for smaller projects.

Re: Chuck help

#6

Re: Chuck help

JKJ in East TN

>Try a search for previous threads on this. Here are a couple I found:

http://www.woodcentral.com/cgi-bin/turning.pl?frames;read=74534

http://www.woodcentral.com/cgi-bin/turning.pl?frames;read=78527

JKJ

Re: Chuck help

#7

Thanks, Everyone

Tony Augruso

>