Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Maple platter

Posts

Maple platter

#1

Maple platter

Mike Schwing from Md.

>Maple of some sort that I don't find around here often, very hard, definitely not silver maple. Found at the log dump. About 14", exterior profile provides about 1/2" of lift at the rim.

I could not think of a single finish that would benefit this piece without at least a drawback or two, so it is as nature left it (minus 4000 grit Abralon) - otherwise - no finish at all. VERY tempting to at least wax it, but I dunno. Sanded at the following grits - 80, 120, 180, 240, 320, 500, 1000, 2000, 4000 (last 4 are Abralon pads). Comments welcomed, sure would like to find more of this tree.


img

Re: Maple platter

#2

Re: Maple platter

Jennifer@Indy.USA

>Hi Mike,

I lllllike it! One of those juicy pieces of maple with a life of it's own. I sure would be tempted to pour some Danish oil on it though.

Beauty!

Jen :)

Re: Maple platter

#3

Re: Maple platter

Sascha

>great platter, Mike, i love that wood and wish i had stuff like that around here

sascha

Re: Maple platter

#4

Re: Maple platter

Pat Mulligan

>Looks like maybe Norway maple. Really nice, Mike.

Re: Maple platter

#5

Re: Maple platter

JKJ in East TN

>>VERY tempting to at least wax it

Wonderful dynamic figure.

If you have any scraps left you might test different finishes. Oil seems to add "depth" to maple and enhance the contrast, although that pieces doesn't seem to need it. Wax would help it to stay clean. My favorite for some woods such as cedar is simply beeswax. (what can be more natural!) It leaves a soft sheen, not at all shiny. I have also put beeswax over oil, either immediately or after the oil dries.

JKJ

Re: Maple platter

#6

Re: Maple platter

Russ Fairfield

>You have used my favorite finish for Maple, nothing at all except the highly polished wood; and it look good. Remember that burnishing the surface with 2500 grit or finer is a compaction of the wood fibers and that doing this is a finish. I think the look of this piece of Maple speaks for itself.

I would suggest leaving it alone and seeing what happens. You will experience some surface dulling and fuzz over time from exposure to light and the atmosphere. An occasional brisk brushing with a stiff natural bristle scrub brush will clean and polish the surface again. It will be less difficult to maintain than wax, and there will no waxy build-uip on the surface to remove.

Re: Maple platter

#7

Re: Maple platter

Ed Karch

>Im with you don't put any thing on it. But I'm the guy that puts stuff out in the yard for a finish. It will gradually turn a silver grey as the surface oxidizes.

Re: Maple platter

#8

Re: Maple platter

Mike Schwing from Md.

>Russ I was thinking of your words/posts when I chose the natural finish. Thought "Russ will probably be pleased". Glad to see I was right.

Re: Maple platter

#9

Re: Maple platter

Turner

>BEAUTIFUL Form & Figure!

I'm almost certain that the wood is Sugar Maple (some call it "Hard" or "Rock" Maple, and I don't know the official name). I've turned many platter forms from this versitile species. We have lots of it in our part of the Blue Ridge Mountains. It's hard as can be, but one of my favorites to turn... takes fantastic detail.

It looks like you got a slab from a section under a crotch. I'd put an oil/wax finish on it to make the ripples pop!

Re: Maple platter

#10

Re: Maple platter

Ed Kelle

>You sure do find the nicest woods. I bet if people knew what was inside the logs they wouldn't just be dumping them. Great job as always. I like that you left those rough spots on the rim rather than turning them away.

Re: Maple platter

#11

Re: Maple platter

Mike Schwing from Md.

>Thanks Ed. Thanks everybody. Ed, that wood actually was bought from a guy in Sweet Home, Oregon. I buy a pallet from him about once a year full of up to 1000 pounds of big leaf maple burl.

His name is Tim Shipp, and his number is 541-367-3495. Be prepared to have your ear talked off! Please tell him I sent you, it does help me actually.

Re: Maple platter

#12

wrong thread. oops.

Mike Schwing from Md.

>