Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Bandsaw accessories

Posts

Bandsaw accessories

#1

Bandsaw accessories

Gary Evans Tallassee, TN

>Hi all,

I picked up an older model 14" Delta bandsaw the other day. I am going to need new tires and I would like to add a new tensioning spring, a tensioning crank and a riser block.

I have the phone number for Iturra Designs and I found a place called R&D Bandsaws. I also looked at Highland Hardware. Any other sources that you could recommend?

I'm hoping I can find a riser block for less than $119. That seems a little high for a piece of steel tube and a couple of bolts.

Any other necessary accessory recommendations would also be appreciated. This saw will be used primarily to cut out turning blanks. Big surprise, huh?

Thanks,

Gary

Re: Bandsaw accessories

#2

Re: Bandsaw accessories

tdaniel

>With the riser block you'll need at least a 1.5hp motor (actual hp....not Sears hp). When I decided to put the riser block on my old Delta and increase the hp I found that it was just as cheap to sell my saw and buy a new one. Before B&D bought Delta the riser was $89 plus $10 for an el crapo longer blade. You'll need a 3 or 4 tooth/inch blade with extra kerf for doing the blanks.

TD

Re: Bandsaw accessories

#3

Re: Bandsaw accessories

John K Jordan

>>...seems a little high for a piece of steel

>tube and a couple of bolts.

Does seem high, but it's more than a tube! The block I bought for my 14" Delta was a hefty chunk of cast iron, precision ground on the mating surfaces and with alignment pins to keep the saw frame rigid and in alignment. One note, there is very little clearance for a wrench to disassemble and reassemble - no way to use a handy dandy crescent wrench. I had to spend even more for tools! (If you get one and don't have the right size tools, you can borrow mine.)

Besides the riser block, the best accessory I bought for the saw is a quick tensioner - saves a lot of time tensioning and detensioning. I also replaced the guide blocks with the fiber cool blocks.

BTW, my saw is a 1hp and I find it plenty powerful enough to cut large blanks (as long as the blade is sharp and well tensioned.)

JKJ in East TN

Re: Bandsaw accessories

#4

Re: Bandsaw accessories

Russ Fairfield

>In the old days, we made riser blocks for lathes and bandsaws from blocks of Oak and held them together with bolts from the hardware store. They must have worked because some of us are still using them.

Re: Bandsaw accessories

#5

JL

Re: Bandsaw accessories

JL

>I am assuming you have a fence. If not, get one. Miter gauge might be useful. Another good accessory would involve making a jig for cutting round blanks.

Re: Bandsaw accessories

#6

George Balock

Re: Bandsaw accessories

George Balock

>Take TD's advice upgrade the motor. I just did and what an unbelieveable difference.

George

Re: Bandsaw accessories

#7

Keith Tompkins

Re: Bandsaw accessories

Keith Tompkins

>Hi Gary, a bigger motor would be beneficial....1.5 hp or more. They usually came with a 1/2 hp motor, which is underpowered for cutting blanks.

Re: Bandsaw accessories

#8

Re: Bandsaw accessories

Paul Waddle

>Hi, I have an older rockwell 14'' band saw and I was purposing todo just what you are. If you are having fun go ahead,but I would advise against spending on older saw. The tires probably need replacing,you want a riser block,you will have to get some 105(??) length blades,tensioner,cool blocks-at least 400$. Sell your saw for 250$,and then buy the jet or delta on sale. Don't get me wrong,fixing up an older tool is fun,but if you consider your time,effort and what other things you could be doing,well....JMO,good luck whatever you decide. I really like the 18"rikon and,jet and delta for resaw capability,but for just enjoyable cross grain sawing,I'd just as soon have the old standard 14". PW.

Re: Bandsaw accessories

#9

Re: Bandsaw accessories

John Lucas

>Gary The Delta riser block is worth it. It's easy to install, is very solid and works great. I thought about wooden risers but when a friend wanted to do his we ordered a taiwanese riser from Grizzly because the saws look similar. They aren't exactly right but we filed off the pins and mounted the block anyway. It took a little playing to get everything lined up but it did work.

As far as accessories, I bought an aftermarket fence from a friend who was selling it. I don't think it's any better than using my homemade fence for resawing and gets in the way when I try to use my homemade circle cutting jig. The only accessory I think would be useful is a larger table. I'm thinking about designing one that would take different size rotating discs for sawing turning blanks. Haven't figured out how to change all the sizes yet but Ihaven't worked on it very hard either.

Re: Bandsaw accessories

#10

Re: Bandsaw accessories

Gary Evans Tallassee, TN

>Thanks all, for your comments.

Since all I have in this saw is a very pleasant 3 hour visit and a little gas money, I think I will spend a few dollars to fix it up.

1.5 or 2 HP motor, riser block, tensioning spring and tires are really all I need for right now. A tensioning crank would be nice, but not absolutely necessary. I have a stand and a good fence already. I was looking at the newest version Delta 14" yesterday and it seems that this one is much heavier made, particularly the trunnion assemblies and the guide holders. This one also has a fully enclosed upper arm rather than open with cast webbing. Adds a little more mass, I think.

Again, thanks to all who responded,

Gary