Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

My first PIC post

Posts

My first PIC post

#1

My first PIC post

Derek

>Well here is my first item that I am showing to everyone. I am quite pleased with it. It is a gift for a friend for her wedding. They asked for no gifts but oh well.

It is Spalted Birch sanded to 1500 Micron and buffed with... are you ready for this... an orbital palm buffer. I used the cotton cloth and applied the compound and held on tight. Came out pretty well. It is approx. 9" x 2.5"

I made a doughnut chuck for this bowl so I could finish the bottom but it tried to slip on me. I didn't want to secure too tightly as I was afraid I would dent the wood. Any recommendations as what to use to help secure it?

Comments welcome, input appreciated and feedback a must.


img

Re: My first PIC post

#2

Profile shot 

Derek

>


img

Re: My first PIC post

#3

Re: My first PIC post

Carole in VA

>Someone (Mike?) uses that stretchy plastic strapping stuff that comes on a roll and sticks to itself to secure bowls on jam chucks, etc.

Nice bowl! I'm sure the bride will love it. Don't be shy about posting pics.

Re: My first PIC post

#4

Re: My first PIC post

Jim Shaver - Oakville, Ontario

>I love the wood, the shape and the Buff!!!

:-)

take care,

Jim

Re: My first PIC post

#5

Re: Profile shot

Jennifer@Indy.USA

>Hi Derek,

I love your bowl. I love these hefty pieces that really show off the material. It's a great piece of wood and the finish is fantastic too. Doesn't matter how you get the finish...if it looks good who cares :)

Jen :)

Re: My first PIC post

#6

Keith Tompkins

Re: Profile shot

Keith Tompkins

>Hi Derek, The critical part to a piece such as the one you posted is the curve in the bowl section. The curve must be continuous to look right....from the photo, your's appears to be. I also like the foot size on the piece. A common error is to make the foot too large, which affects the balance of the work. Your bowl is very plain, which highlights the figure of the wood, rather than compete with it.Nice job!

Re: My first PIC post

#7

Re: My first PIC post

Kevin Turner

>Did you use that rubberized type placemat material along with that doughnut chuck( Friction Plate?). Sometimes the tolerance is sooo close I don't need that material. Sometimes I wash it out under hot water and dishsoap Just to clean it. I've also used the inner tube from a mountain bike, wrapping the rim of the bowl with the rubber.

The bowl looks nice. Cheers KevinT in T Bay

Re: My first PIC post

#8

Re: My first PIC post

W.C. Turner

>Derek,

Try a mouse pad, a router pad, or the cheap rubber mats like you line drawers with, in order to prevent slippage.

W.C.

Re: My first PIC post

#9

Re: Two or three strips of double sided tape

Al Crandall- NE of Indy

>Two or three strips of double sided tape between the bowl and the chuck plate should prevent slipping and lessen the need for much clamping pressure from the doughnut.