Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Wood Indentification help

Posts

Wood Indentification help

#1

Wood Indentification help

vicmarc.fan

>A friend gave me a block of wood he has had for years in storage. He couldn't remember what it was anymore. It was light gray on the sides where he used the bandsaw and looked like it was fuzzy at one time. The bark seemed like it would stay on so I turned a natural edge vase. In places it looks like sycamore but the bark in wrong for that and I have not seen the red things before. It also had a branch inclusion that I didn't see at the start. Sorry about the picture quality. Need to know because our club made a rule to have name, date and wood on things for show and tell. Thanks.

Ron


img

Re: Wood Indentification help

#2

Re: Wood Indentification help

Carole in VA

>Can you do a larger picture?

Re: Wood Indentification help

#3

Re: Wood Indentification help

vicmarc.fan

>Wish I could. When I first posted the picture it was too large ao I went back to Picture It, which is all I have and done something until it was accepped. Know what I should have done?

Ron

Re: Wood Indentification help

#4

Re: Wood Indentification help

steve worcester

>Not knowing where you live, and not knowing how hard the wood was, looks like Pecan. It gets those red spots around the base of the tree, up to about 6' sometimes.

If it was dry and hard as a rock, definitely Pecan (Pecancrete)

Steve Worcester

www.turningwood.com

Re: Wood Indentification help

#5

Re: Wood Indentification help

Ed Karch

>Hard, soft, can you see rings? The best I can do from the picture is somekind of hard wood. I think I see rings which would make it ring pourous which gets rid of the stuff most difficult to ID. Those streaks are hicory/pecan like.

Ed

Re: Wood Indentification help

#6

Re: Wood Indentification help

John K Jordan

>Ron, If you want to email the original file to me, I'll be glad to try to process it to the maximum size that will fit.

A couple of things to do for a case like this: crop the picture as much as possible - the background doesn't help with the ID. Even 1/2 of the turned object might be enough to see the grain better. Did the wood have any particular smell?

JKJ in East TN