Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Old Friend snaps.... Kinda long...

Posts

Old Friend snaps.... Kinda long...

#1

Old Friend snaps.... Kinda long...

Spence in Rhode Island

>I share my shop with my best friend and I'm responsible for his turning addiction. He decided to make a mushroom from a spruce log. About 18" long and 12" dia. We're talking about the big kahuna of mushrooms here for sure. Anyway he used my 1 1/4" Sorby roughing gouge that I've had for more than 15 years. A heck of a lot of wood got turned into shavings with that gouge. Of all the tools I have it was one of my favorites. Anyways to make a long story short, the tool rest shifted on him and it snapped the tang right at the handle. Most importantly he wasn't hurt but it scared the dickens out of him to say the least. I was making a pen on one of the other lathes when he came over and just layed the pieces on the bench. Maybe I'm just weird or something but I will really miss that gouge. So its off to Woodcraft tomorrow for a new one.

Regards

Spence

Re: Old Friend snaps.... Kinda long...

#2

Re: Old Friend snaps.... Kinda long...

Ed Moore

>Spence,

Consider a P&N roughing gouge with a tang that is almost 1/2" in diameter. I got one and really appreciate its sturdiness.

Ed

Re: Old Friend snaps.... Kinda long...

#3

Re: Old Friend snaps.... Kinda long...

Spence in Rhode Island

>LOL Ed, We'll have to see how deep my buddie's pockets are on this one! Looks like I'll have to give the P&N a close look. Thanks for the tip.

Re: Old Friend snaps.... Kinda long...

#4

Re: Old Friend snaps.... Kinda long...

W.C. Turner

>Spence,

The Woodworkers Shop has Crown tools on sale now. The big 1-1/4" roughing gouge is about$42, I think. Reg. about $52.

Re: Old Friend snaps.... Kinda long...

#5

Re: Old Friend snaps.... Kinda long...

John K Jordan

>I think I try a repair. I understand welding HSS requires special techniques (anneal, preheat, HSS rods) but any competent shop should be able to do it.

You might also try contacting Sorby. Perhaps they will replace it.

JKJ in East TN

Re: Old Friend snaps.... Kinda long...

#6

Re: Old Friend snaps.... Kinda long... *LINK*

Ed Moore

>Lee Valley has the P&N roughing gouge. They come without handles, so I put a nice sturdy one on mine. Check out:


Lee Valley P&N

Re: Old Friend snaps.... Kinda long...

#7

Re: Old Friend snaps.... Kinda long...

Ed Moore

>Spence,

Here's a picture of the P&N 1 1/4" roughing gouge with my Alan lacer skew.


img

Re: Old Friend snaps.... Kinda long...

#8

Re: Old Friend snaps.... Kinda long...

Marvin ewing

>Woodcraft has 30% off almost all of the Robert Sorby turning tools in October.

Re: Old Friend snaps.... Kinda long...

#9

Re: Old Friend snaps.... Kinda long...

Spence in Rhode Island

>Two good tips! Thanks John will look into both. I have a friend and neighbor who is a gunsmith/ knife maker who is my go to guy for machine work. Will see what he says. Besides it will give me a chance to drool over his knives. He makes VERY high end automatics. Beautiful Knives to say the least.

Thanks again and take care

Spence

Re: Old Friend snaps.... Kinda long...

#10

Re: Old Friend snaps.... Kinda long...

Spence in Rhode Island

>Ed, looks heavy duty in the extreme! With a friend like Lucas I should probably look for bomb proof tools. LOL

Thanks again

Spence

Re: Old Friend snaps.... Kinda long...

#11

Re: Old Friend snaps.... Kinda long...

Spence in Rhode Island

>Thanks Marvin. will be going there at some point and will check out what they have.

Take care

Spence

Re: Old Friend snaps.... Kinda long...

#12

Keith Tompkins

Re: Old Friend snaps.... Kinda long...

Keith Tompkins

>Spence....buy it unhandled! Now's your big chance to make a new friend!LOL Keith

Re: Old Friend snaps.... Kinda long...

#13

Re: Old Friend snaps.... Kinda long...

Spence in Rhode Island

>Keith, I would buy just about all my tools unhandled if I could get them that way but not too many companies offer them unhandled. I'm too much of a cheapskate swamp yankee to waste a store bought handle unless its defective. LOL