Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

tool handle question....

Posts

tool handle question....

#1

Keith Tompkins

tool handle question....

Keith Tompkins

>I was rather stunned by how many hits my tool handle post received...I'm curious, how many at this site make their own handles, and do you just make utilitarian pieces, or really finish them nicely? Why?

I can imagine some really neat tool handles...Molly's could have a burned section with a mustang. Andi could have a prismacolor leaf motif. Mike, maybe a bug symbol on each one. These are just a couple of ideas....What would you make?

A waste of time....? I don't think so. After all, how many pieces do we all turn that sit on a shelf, unused? Tools are something we use every day.Sounds like a cool contest, too!

Your thoughts?

In one issue of Fine Woodworking each year, home-made tools are featured.Personally, I like the concept.

Re: tool handle question....

#2

Steven Antonucci

I do-

steve antonucci

>Saw your curly maple, and it's a beauty. I have my two "primary gouges" turned in birdseye maple, and I think everyone should consider making their own handles as a sign of their craftsmanship.

Now the only challenge is finding about 40 unique pieces of wood (or so) so that I can quickly find the tools when I need them.

Steve

Re: tool handle question....

#3

Re: tool handle question....

Jennifer@Indy.USA

>Keith, I haven't made many, but the ones I have made I love dearly. There's something about making your own tools or even just the handle that is extremely satisfying. I have two hollowing bars that need handles so I think I might just take you up on the idea of doing something that is nice and somewhat personalized.

Jen

Re: tool handle question....

#4

Re: tool handle question.... *LINK*

Pat Riley

>I make all mine. Most of them are just utilitarian, but once in a while I make one like the driver I made for the Katrina Auction - 2 more days left on it


http://www.woodcentral.com/cgi-bin/auctions.pl?read=1408

Re: tool handle question....

#5

Re: tool handle question....

Jorge Castaneda

>I do my handles, totally utilitarian, usually made out of a broken garden handle or such, with a piece of galvanized pipe for a ferrule, not pretty but works.

Re: tool handle question....

#6

Re: tool handle question....

Jim Shaver - Oakville, Ontario

>Hi Keith,

I have mostly handles that are made by the tool company that makes my tools. I do have a few home made tools with home made handles, these are very special to me.

I have a DVD with Dick Sing making tool handles, it's a fun project and I hope to make some one day.

take care,

Jim

Re: tool handle question....

#7

Re: tool handle question....

Ed Karch in No.VA

>I made several handles mostly utilitarian from Osage Orange, Maple, Sycamore. All have nice brass ferrules. The sycamore hollowing bar handles are unfinished to improve grip. I will some time when I have more time get artistic with handles.

Ed

Re: tool handle question....

#8

Re: tool handle question....

Don Henthorn

>I have made many handles over the years The latest but not too new are these on some heavy weight scrapers made from O1 steel. I laminated some of them to make them different.





Re: tool handle question....

#9

Re: tool handle question....

John Lucas

>Keith I've totally lost track of how many tools I have made. Well over a hundred I'm sure. I counted one day and had 75 turning tools about 60 I had made myself. I don't know how many I've made for other turners. I've made bow saws and tapered reamers for windsor chairs. I needed a special plane once and didn't have the money so I built it. I've made several custom carving tools. I've made a bunch of tool rests. Most of them have been made because I need a special tool so I throw them together and they look homemade but then these are purely utilitarian. Every once in a while I make a tool just for me and put a little effort into it.

The best tools I make are the ones that are given away. I donate them to the club for auctions or sell them in my classes. These are special pieces and I spend the time it takes to make them nice.

Re: tool handle question....

#10

Re: tool handle question....

Carole in VA

>Only tool handles I've made so far is a walnut handle for my chainsaw files and a couple of handles for pen barrel whatchamadingies...those things that you ream the blank out so it's flush with the tube. The proper name for the thing escapes me.

My next turning tools will probably be bought un-handled, so I will make some then and I plan on making nice ones if I can find the wood.

Re: tool handle question....

#11

Re: tool handle question....

Jim Ketron

>Here is one I use a lot that I made for my P&N bowl gouge


img

Re: tool handle question....

#12

Re: tool handle question....

Brian Hahn in SW Wisconsin

>I've re-handled most of my turning tools. That way I can make the handle thick enough to be comfortable in my hands. I usually make the handles longer as well. Many of the commercial handles are ludicrously short.

My preferred wood is shagbark hickory that I harvest from my woods. It's very tough. (It has spit the wedge back out when I tried to split it.) It's also fairly heavy which improves the stability of the tool.

My handles tend to be straight so I can comfortably grip them anywhere along the length. I usually burn lines in the areas where they are mostly commonly held to improve the grip. A couple of handles have shallow spirals running the length of the handle for an even better grip. I've planned flats on a number of handles, usually six (hexagon). That originally was a "design opportunity" (handle too fat) that has really worked out well. The handle is easier to hold and, as an added bonus, the tool doesn't roll off the lathe or bench when I put it down.

Re: tool handle question....

#13

Re: tool handle question....

Lan Brady

>Keith,

I make tool handles as I need them. I copy the generic pattern with copper tube reinforced ferrules. But I make adjustments on diameter for my hand. I make then unusual colors. I have yellow dyed Peruvian Walnut. I have purple mahogany handles. Yes it is wierd, but no one else has one like them!!!

Lan

Re: tool handle question....

#14

Here is one I made .....

Fred in NC

>All I found handy was a piece of rosewood, about 7/8" square, so that is what I used. The handle is about 7" long.

The tool itself is a holder I made for micro-beading bits. The one pictured makes 1/8" beads, and I also made bits for 3/32" and two 1/16" beads side by side. It is so good to be able to make some of my own tools !


img

Re: tool handle question....

#15

The metal parts

Fred in NC

>I made this from 1/2" drill rod. It can hold 3/16" square or 1/4" round bits. The shallow spiral in the shank is to give glue somethng to hold on to.

Re: tool handle question....

#16

Re: The metal parts 

Fred in NC

>


img

Re: tool handle question....

#17

I still want you to make me one of them Jim!

Mike Schwing from Md.

>I'll pay!

Re: tool handle question....

#18

Re: tool handle question....

Bob Hackett

>Being a former metal worker in a yacht yard,the answer is yes.

My brother introduced me to turning many years ago so I would make tools for him and know what to make.This was back when a HSS bowl gouge was a relatively new thing.He has the largest collection of solid stainless steel toolrests in the state of Utah.All polished and looking like deck hardware.He tells me he always has folks ask where he got them.

In order to get back at him I got him going in metalworking.He now has a welding machine,forge,Burr King belt sander,air tools,and a machinist`s cross slide to use on his wood lathe(Powermatic) for machining.I think we`re almost even.

My early tool handles were all made from figured local woods with polished SS ferrules.When I developed nerve problems in my arm I started making handles from bronze pipe with lead shot in them and covered the gripping area with soft foam grips from excercise machines.The tangs are gripped by SS drilled bushings and the metal areas are still all polished.

Students in my classes are always eager to try all these tools and I find many pattern thier own handles after some of the shapes I have on my old wood handles.

I can understand the utilitarian camp and sometimes wonder why I feel the need to "Pretty it up" with everything(my Conover has a rounded over,polished aluminum motor mounting plate.I know,I`m gone!)

To me my tools serve the same purpose as those fabulous tool boxes the old joiners used everyday.They speak of my commitment to my craft and they let others know the possibilities.They make everyone who picks them up smile,including me,can`t think of a better reason to have made them.

Mainely,Bob

Re: tool handle question....

#19

Good looking tool, Fred. Quality work.

Clem Wixted

>

Re: tool handle question....

#20

Pen mill.. :>)

Spence in Rhode Island

>

Re: tool handle question....

#21

Re: tool handle question....

Spence in Rhode Island

>I make both tools and handles when I need them. Handle material depends on what I have at the moment. So far I've used curly maple cherry, mahogany and the tradional ash. I think I have just as much fun making the tools as I do turning. If I have to put a handle on the new roughing gouge there is a pice of coccobolo I'm thinking about for the handle. Nice and heavy and hopoefully strong enough to survive my buddy Lucas using it. LOL

regards

Spence

Re: tool handle question....

#22

Friends and neighbors

Bob Hackett

>are why you need 2 sets of tools,the good set and the loaner set.

MB

Re: tool handle question....

#23

I made a few

Dominic Greco in Richboro, PA

>Keith,

I made several handles for tools. Both were for (2) shop built tools. My texturing tool, and a shear scraper. Both were made from walnut and both featured burned rings for decoration. Since both handles were sized to fit my grip, they are very comfortable to use, and easy to hold.

However, I haven't gotten around to replacing any handles that came with my tools. Just not enough time in the day.

See ya around,

Dominic


img

Re: tool handle question....

#24

Thank you, Clem ! ..

Fred in NC

>

Re: tool handle question....

#25

Re: tool handle question....

Don O.

>Hi Keith, I love your curly maple handles. I have made quite a few tool handles for home-made tools like scrapers and hollowers. Nothing too fancy but I usually burn 4 lines near the ferrule so I know they're mine in a pile. I've used ash, cherry and even teak for handles. Originally learned the process I use from Bob Rosand and have demo'd it at our club.

Take care and see ya soon, Don