Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

New Motor in My Bandsaw

Posts

New Motor in My Bandsaw

#1

George Balock

New Motor in My Bandsaw

George Balock

>Thanks to all who provided help and advice in my bandsaw motor replacement project, especially Phil Lieberman. The saw with a 1.5 HP Baldor can't be bogged down! It wasn't an easy project, but it was worth the effort to replace the undepowered JET motor.

George

Re: New Motor in My Bandsaw

#2

Re: New Motor in My Bandsaw

vicmarc.fan

>george,

I missed your post about the bandsaw. I won't go into detail with what I did with my saw but I stopped with a 2HP running on 240volts. I doubt it actually has 2HP but now my saw will resaw 12" white oak and will cut wet wood like butter. I wish I had the $ for a Balador but the Dayton is doing the job. The motor fit the mountings on my Delta 14" saw but the door wont close now so I left it off. Seems funny I had to go from 3/4HP to 2HP to get the saw to perform.

Ron