Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Jet Mini Lathe

Posts

Jet Mini Lathe

#1

Jet Mini Lathe

Rob Overton,Houston, Texas

>I have a jet mini that I use . I try to listen to AM radio. The interference created by the motor is bad. Does anyone have an answer to what I consider a problem, other than listen to FM..

Re: Jet Mini Lathe

#2

Re: Jet Mini Lathe *LINK*

Mark Kauder, Phenix City, AL

>I assume that you are talking about the Variable Speed version. (?)

You can purchase or make a Radio Frequency (RF) filter. I bought mine from Oneway (see below - go to the bottom of the web page).

I put one on my Vega and it works like a charm.

Mark


http://www.oneway.ca/lathes/2436_access.htm

Re: Jet Mini Lathe

#3

Re: Jet Mini Lathe

Rob Overton,Houston, Texas

>Mark you are correct. It is a variable speed. Thanks a million.

Rob

Re: Jet Mini Lathe

#4

Re: Jet Mini Lathe

Barry Turner

>Get a CD player............ :-)

Barry

Re: Jet Mini Lathe

#5

Didn't someone do a WC article on this subject?

Rod Peterson -- Ormond Beach

>Oneway RFI Filter Review

Why, yes—I believe they did.

Rod

Re: Jet Mini Lathe

#6

Re: Jet Mini Lathe

John Lucas

>Barry I bought a CD player and Satellite Radio. I haven't listened to AM radio since the 60's

Re: Jet Mini Lathe

#7

Re: Jet Mini Lathe

Wayne Cooper Charlotte NC

>Rob

I had the same trouble and order a filter. They were so cheap that I ordered 10 of them and have 9 left. I do not know what I was thinking. If you send me your mailing address I will send you one. It took out all the interference on AM radio. Wayne