We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>My wife and I are leaving Sunday for a trip down Skyline Drive and to Shenandoah National Park. We are leaving from the Cleveland, Ohio area. Are there any suggestions of things to see in the area? Are there turning or wood places along the way? Information on other sights or activities is welcome too. We plan to do a little tent camping, a little hiking, a lot of sight seeing, and take some pictures. If the weather is bad, or camping isn't available, we will stay in motels. How far is the Skyline drive from John C. Campbel and Arrowmont Schools? Is there anything to see at the schools if we just drop by? My wife is a non-turner I don't want to take up large volumes of time with turning related visits. A few hours out of the whole trip would be OK though. I hope the hurricane isn’t affecting that area too badly and has moved on before we get there.
I tried to post a nice descriptive set of suggestions, but I got cut off.
1. See the Artisan's Center in Waynesboro, VA, at the second exit off I-64 East from I-81. Good turnings and other crafts.
2. It would take about 7 hours from Waynesboro to Gatlinburg, TN, where Arrowmont is located.
3. I suggest getting off I-81 at Buchanan, taking route 43 and Blue Ridge Parkway north for a short distance to the Peaks of Otter and a decent meal at the Inn. Go south on Blue Ridge Parkway to Roanoke (route 220 N) for some beautiful scenery. I am going to that stretch of the Parkway today to see the hawk migration - supposedly about 5000 will fly over today.
4. I am 1/2 hour from the intersection of Blue Ridge Parkway and 220 where I would go south towards Rocky Mount.
I tried to post a nice descriptive set of suggestions, but I got cut off.
1. See the Artisan's Center in Waynesboro, VA, at the second exit off I-64 East from I-81. Good turnings and other crafts.
2. It would take about 7 hours from Waynesboro to Gatlinburg, TN, where Arrowmont is located.
3. I suggest getting off I-81 at Buchanan, taking route 43 and Blue Ridge Parkway north for a short distance to the Peaks of Otter and a decent meal at the Inn. Go south on Blue Ridge Parkway to Roanoke (route 220 N) for some beautiful scenery. I am going to that stretch of the Parkway today to see the hawk migration - supposedly about 5000 will fly over today.
4. I am 1/2 hour from the intersection of Blue Ridge Parkway and 220 where I would go south towards Rocky Mount. Call me if you want to come by and see Burnt Chimney, VA. E-mail me for phone number, or check AAW directory.
>I'm not sure how far south Skyline Drive goes, but to get to John C. Campbell you need to look for Murphy, NC, on your map in the far southwestern part of the state. JCC is in Brasstown, which is about ten miles east of Murphy, on Old Route 64 (which itself is off US-64).
There are a couple of ways to get to Murphy, and if the one you choose is to go down to Franklin first then west on US-64, you'll want to catch Old Route 64 at Hayesville instead of going almost all the way to Murphy and doubling back. It's just west of the traffic light at Hwy 69.
>That's a long haul. The Skyline Drive/Blue Ridge Parkway "ends" near the Great Smoky Mountains National Park. Go through the park to get to Gatlinburg/Arrowmont. Take US 19 then US 74 to get to Murphy, NC and then the John C. Campbell Folk School. You have to see the Park.
J.C. Campbell is a fair haul from the Park (maybe 70 miles). Is it worth seeing? That's your call. Tuesday is dance night (Contra and Square). Fridays are often concert nights. Saturday (when there are no weekend classes) has more dances. Vistors are welcome in the studios (at least when I've taken classes there). The woodshop isn't as pretty as Arrowmont though. Check their website and calendar to see if there is something you want to check out (or people whose brains you want to pick).
>There is another artisan center in Ashville right on the parkway. Tons of other artists in the town. Nice campground about 2 miles from the center. Dennis
>I'm not sure, but, a section of the parkway between Mt. Mitchell and US221 may still be closed since last September. Check it out on the web as I'm pretty sure the Parkway has a page under the Nation Park Circus stuff. The Folk Art Center is the place for turnings and such near Asheville. Just north of US 70 on the east side of town. If you get the chance, Mt. Mitchell is worth the effort. Great views and it's always a good bit cooler up there. I'd also suggest a short stroll down to Yellowstone Falls at Graveyard fields south of Asheville. One of my favorite areas in these mountains.
Enjoy the drive but you should not try to be in a hurry up on that road.
Andy Halterman
Really like the parkway in the winter when it's closed so I can have fun with snowshoes and XC skis in Hendersonville, NC™
>I'm printing out all of the suggestions that I get and taking them with me. We are just going to go with the flow on this trip. We will stop where things look interesting and spend as much or as little time as we like. You have already given me some good ideas.
>Tom - As someone else mentioned, the Blue Ridge Parkway is closed for a stretch in norther NC. At least, it was still closed last June when I was down there. It's possible to bypass that stretch, but be prepared for some pretty scary mountain roads.
The Folk Art Center (in Asheville) that others have mentioned is the headquarters of the Southern Highland Craft Guild. It includes their largest shop,with several woodturners represented. Me included, although I don't think they have any of my work in that shop right now. Another of their shops, called Parkway Craft Center, is also on the Parkway about 90 miles north of Asheville. It's in the Moses Cone Mansion, a restored mansion that now belongs to the Park Service. This is just south of Blowing Rock, NC, and there are some nice galleries in town as well.
In the town of Black Mountain, NC, a few miles east of Asheville, there's a craft shop that sells mostly woodturnings. The owner has his lathe in the shop - the biggest I've seen, the bed is two rails in the floor of the building. The last time I saw that was about ten years ago, I don't know if it's still there.
From the south end of the Skyline Drive/north end of the Blue Ridge Pkwy to Brasstown, where J.C. Campell is, is quite a ways and no fast way to get there.