Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

broken tool rest

Posts

broken tool rest

#1

broken tool rest

Peggy

>My son was usinng my Wilton mini lathe and the tool rest broke off at the stem. Anyone have any suggestions on how to make a new one or fix the broken one? The broken one is make of cast and I took it to a blacksmith in town and he said it cant be welded.

I would appreciate any ideas.

thank you

Re: broken tool rest

#2

Re: broken tool rest

Ron in Drums PA

>All you need to do is have someone weld a "T" from some round bar stock.. The new stem needs to be the same diameter as the old one. The top bar can be any length, so have a few different ones made at the same time.

Re: broken tool rest

#3

Re: broken tool rest

Peggy

>Thank you very much. My son will be happy to use th lathe again.

Re: broken tool rest

#4

Re: broken tool rest

Ron in Drums PA

>Your very welcome Peggy

I forgot to mention, the height of the tool rest should remain the same.

Re: broken tool rest

#5

weld, braze, or buy *LINK*

John K Jordan

>Cast iron is difficult but not impossible to weld. (Google "weld cast iron) A competent shop can weld it, or anyone can braze it. I usually fix cast iron myself with standard brazing rods and an oxy-acetylene torch, but last year I had a wood-burning stove door welded by a local shop for $5.

As mentioned, making a new tool rest from round rods (or angle iron) is relatively quick and easy. I made one for my Jet mini lathe using a steel rod to give me more length than the stock rest. It took about an hour but much of the time was grinding a proper hollow on the post before welding.

You can buy one already made. I've bought several from Best Wood Tools and they've been very high quality at a reasonable price. Link below.

JKJ in East TN


Best Wood Tools toolrests

Re: broken tool rest

#6

Re: broken tool rest

Gary Evans Tallassee, TN

>Peggy,

What is the diameter of the stem? If it's 3/4", I may have one that I would like to get rid of.

Gary

Re: broken tool rest

#7

Re: broken tool rest

Kevin Turner

>The stem can be replaced, by grinding off any edges. then drill out the base to accept what-ever diameter rod.. I drilled into the side an taped it for a set screw.