Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

New Tools

Posts

New Tools

#1

Keith Tompkins

New Tools

Keith Tompkins

>A photo of one of my new tool handles. I cannot get a close up shot of the tool edge as the image is way out of focus. I will work on that. I'm working on a complete set. this one is a detailing tool.


img

Re: New Tools

#2

Re: New Tools

Carole in VA

>Wow, I'd be afraid to use something that beautiful in my trashy old shop! ;)

Re: New Tools

#3

Re: New Tools

John Lucas

>Keith Georgeous. Do you like the big bulge near the "hand" part of the handle. I tend to make mine a little smaller but still bulbous.

On the camera side, does your camera have a close focus mode. Many do. You have to go into the menu and set it for close up. Look for a little flower in a pot. That's kind of a universal close up symbol.

Re: New Tools

#4

Re: New Tools

Wayne Leach

>Too nice to use, frame it where you can look at it every day!!

What wood did you use?

Wayne

Re: New Tools

#5

Re: New Tools

Bruce McElhaney Spring Lake, MI

>Beautiful. It is Curly Maple?

Re: New Tools

#6

Re: New Tools

Mike Schwing from Md.

>Whew. Not going to be hard to find that one amongst a pile of others! Beautiful!

Re: New Tools

#7

Keith Tompkins

Re: New Tools

Keith Tompkins

>Hi John, I tried the macro setting, but NG. I like the bulge on the handle for control. I keep my thumb on the part between the beads.

Re: New Tools

#8

Keith Tompkins

Re: New Tools

Keith Tompkins

>Hi Bruce and Wayne, yes it is sugar maple (rock maple) sometimes this figure is referred to as tiger maple. This is one tool of a complete set I am working on.

Re: New Tools

#9

Re: New Tools

JamieDonaldson

>Now Keith, that is really a little too anal- what will it look like after you use it to hammer a piece onto the drive spur about a dozen times?? You must have too much time on your hands. I always think about a story told about Rude Osolnik- someone made him some nice tool handles because his were legendary TRASH, and he took out the steel and made candlesticks out of the pretty handle wood!

Re: New Tools

#10

Keith Tompkins

Re: New Tools

Keith Tompkins

>You raise a few good points Jamie, but heres my feeling. I don't have many turning tools. I simply cannot afford them, and don't need many of the tools that are on the market. Sometimes I just have to do without.

However, these are my own custom tools; easy to make, fun to turn. The wood is from cutoffs from big lumber orders...dirt cheap. I have about five bucks invested per tool. I will use these on my demos and in my classes. Why? I always stress: do your best. whether it's a bud vase, bowl, whatever. I feel these tools are a reflection of me: I am a professional and these are the tools I produced. I did my best.

Although it seems like overkill, the length of the handle fits right against my side. The diameter fits my hands perfectly. the bulge in the handle feels natural in my hand...in use, the tool feels like an extention of my arms. I will use these for the rest of my career, then pass them on to my son or daughters. I have a few of my grandfather's tools, and a few of my dad's tools. They are special to me. My kids can say "My dad made these."

Jamie, it feels good to use these tools...I feel like a gunslinger who has a pair of custom engraved pearl handled revolvers. I have the only set of Tompkins autographed turning tools on earth.

Now, go and make a set of Jamie Donaldson tools for yourself! LOL

Re: New Tools

#11

Ooooola! Very nice Mr. Tompkins!

Jennifer@Indy.USA

>

Re: New Tools

#12

Handle question

Bob Hackett

>Why do you suppose some of us go out of our way to make the most impressive handles we can(Flashy wood,crisp and correctly proportioned detail,polished ferrule)while some live in the camp where sticking a bit of metal in any old scrap will do?

Just wondering.

Mainely,Bob

Re: New Tools

#13

Re: New Tools

JamieDonaldson

>Keith- I already have! When I started making my own hollowing tools (after studying with David Ellsworth in 1990), I made nice walnut handles because I've always liked walnut and had many trees here on the farm. Then I found that they didn't need to be highly sanded, or well finished, or perfectly round, and soon I was ALMOST back to Ellsworth's tree limb for a handle situation, but I wasn't willing to digress THAT far!!!

Re: New Tools

#14

Keith Tompkins

Re: Handle question

Keith Tompkins

>Hi Bob! I got a lot of cut-offs from Sandy Pond hardwoods in Pa. near where my brother lives.....Curly maple, birdseye maple, etc. I thought they would make really nice handles....in fact I gave away the two birdseye tools I made, and several people asked for more.

Personally, I figured, hey, I'm a turner....my tool handles are turned...a no-brainer. I know people who play golf with custom clubs, ballplayers have custom bats produced, some people ride customized motorcycles, etc. I thought it would be nice to make a set of special tools.

Would I be content to stick a piece of tool steel in a whittled stick? No! I guess Jamie is right...way too anal.

Re: New Tools

#15

Re: Handle question

Bart Leetch

>Beautiful work & wood Keith.

Here is my first try at making a handle out of spalted Madrone.


img

Re: New Tools

#16

Keith Tompkins

Re: Handle question

Keith Tompkins

>Nice job Bart. Handles are fun to make....