Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Blessing cup

Posts

Blessing cup

#1

Blessing cup

Ed Kelle

>Made from cherry 3.5" x 2". I decided to try some smaller bowls, and as I worked on this one, I noticed that if i tried to do the usual and take down the rim to an even height, I would not have much of a bowl. So even though I did not balance it well, I decided to leave the natural profile to it. I also decided to leave a base to it, which is not my norm at all. The more I looked at it, the more it appeared to to a short cup. I textured this and gave it an aged look with English chestnut stain. No further finish applied, I want it to look more authentic. For some reason I kept thinking of Indiana Jones and the Last Crusade with the scenes of all the cups and how the real cup was one of a carpenter. Of course mine was shorter so I see this as more of a short cup for holy water that might sit in an old church. Thus the name of this cup.

Yea I like to get artsy fartsy with explanations of my works, I've been doing that for ages.

Critiques are welcome, so lets hear them


img

Re: Blessing cup

#2

Re: Blessing cup

Jim Shaver - Oakville, Ontario

>Hi Ed,

It does have a rustic look, well done, I think it takes some heart to find something you see in a piece of wood, you did it here very well.

take care.

Jim

Re: Blessing cup

#3

Re: Blessing cup

Jim Ketron

>Nice Job! Looks like a old iron cup that has been lost under the sea for hundreds of years.

I like it!

Re: Blessing cup

#4

Re: Blessing cup

Bob R

>Ed

Great and weird. What is the rought finish?

Keep it up..

BobR

WestMac Turning

Re: Blessing cup

#5

Re: Blessing cup

Ed Kelle

>Thanks everyone. The texture was using the dremel again, using the small round diamond bit and also a roundish stone one this time. Though the stone clogged up quite frequently, it left a little softer profile. I am now using the small black brush of the dremel to de fuzz the texturing. Its quick and easy