Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Photographing chatoyance?

Posts

Photographing chatoyance?

#1

Photographing chatoyance?

Carole in VA

>I know you can't capture the "movement", but I have seen some photos that do a pretty good job of capturing the "light" How do they do that and not get glare? This is a piece of Koa that Doug Leite sent me and the chatoyance is beautiful but in a pic it looks drab.


img

Re: Photographing chatoyance?

#2

Re: Photographing chatoyance?

John Lucas

>Carol Chatoyance can't be photographed in one photo. If you use a relatively small light source, not a diffused light source, you can show off one view of chatoyance but as you know when you move the wood will change. You can take a photo of either of these changes but not both at the same time. The Chatoyance you see in woods such as tiger maple can be photographed because usually only one view will show off the tiger pattern. This may be the way with your bowl. Try using a smaller, direct light. You willhave a harsh shadow to deal with. Use a second light through a big panel or diffuser to light up the area where the shadow shows.

Re: Photographing chatoyance?

#3

Re: Photographing chatoyance?

JamieDonaldson

>Unfortunately it's not possible to show 3D chatoyancy in a 2D image. As John suggests, a small beam of light( don't forget to match color balance!)aimed at a precise area to show detail will be very helpful, but very difficult to control. Hose lights have been popular in advertising photos for a couple of years, but you don't want to hear the price and how they work!