Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

turning blanks

Posts

turning blanks

#1

turning blanks

Dave Midkiff

>Thanks for your response JL. If I cut 2" or 3" above the crotch and 5" to 6" below the crotch I would have a blank 7" to 9" with a diameter of the limb. In your opinion, would that give you enough wood to turn a nice bowl?

Thank you,

Dave

Re: turning blanks

#2

Re: turning blanks

Gary Evans Tallassee, TN

>Hi Dave,

I would add an extra couple of inches in each direction. That way if you get a little checking, you can still get a good sized finished piece from the blank. Do you have anything available to seal the end grain? If you are splitting the crotch, it's also a good idea to put some sealer on the crotch grain as it will want to check there, too.

Gary

Re: turning blanks

#3

Re: turning blanks

Dave Midkiff

>Thanks Gary,

As you see I ended up with 2 posts. I will give it a try.