Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

new tools...photo help

Posts

new tools...photo help

#1

Keith Tompkins

new tools...photo help

Keith Tompkins

>I have been thinking about making some special tools for quite some time. I finally started making them. I purchased a highly figured maple board which I cut up for handles....I want them to be a matching set. One tool resembles a detail gouge, but instead of a flute, I ground the top basically flat, and used a long side grind like a detail gouge. It will cut like a gouge, and shear scrape without digging in. I made it to touch-up coves, and finish inside goblets. Also made several sizes of captive ring tools. I want to post some photos,especially cutting edges, but I'm not that familiar with my digital camera. Could someone give me a few tips on the best settings to use....It's a canon power shot A75. Thanks, Keith

Re: new tools...photo help

#2

Re: new tools...photo help

Sean Troy

>Hi Keith, I,m using the A80. Pretty much the same thing your using. I use halogen lighting with a white photo booth and background. I have had good luck using the camera on Auto and using Photo Shop for minor adjustments or the P mode, tungsten setting and +1 for light balance. Resolution set to large and compression should be super fine. You will see there are allmost endless configurations for settings. what ever you shoot at, run it through Photo Shop or what ever Editing software you have for touch up.You might not even need to. Someday I hope to get a digital SLR and not have to mess with so many settings these point and shoots seem to have. If you don't have the manual for that camera, contact www.canonusa.com and see if they can get you one. It would be a very large help. Good luck, Sean

Re: new tools...photo help

#3

Re: new tools...photo help

John Lucas

>Keith He has given you good advice. Those cameras take amazingly good photos with very little user interface. If you use a gray or neutral background don't use the +1 override. Other than that what sean said works.

Sean the Digital SlR's have the same s#@t it's just easier to override. I don't know why they put all that stuff on there. I am constantly setting my cameras back to manual mode and just shooting. It's far easier than trying to override the auto setting. I tried out the new auto crop setting on my Nikon D2 at the football game this weekend. It is absolutely a total waste. You can do the same thing in photoshop later and you never accidentally cut off someones head.