Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Wands and liability

Posts

Wands and liability

#1

Wands and liability

The Wood Spinner / Bill Hale

>I don't like to be negative but I do like my worldly things.

Possibly we have an lawyer in the group that could dispell my concern of liability after the sale of a pointed hard wand.

It seems that it is todays policy that all blame someone else and sue for any accident.

Do we need some type of written disclaimer and statement that we assume no liability for the use of the toy?

Lets all be safe and not liable

Bill in Casa Grande, AZ.

Re: Wands and liability

#2

Re: Wands and liability

Ken Grunke from SW WI

>I was concerned about this also. I've made a couple wands, one with a disc on the end and the other with a ball.

Re: Wands and liability

#3

Re: Wands and liability

Mark Mandell - Gone Round In Jersey

>Bill,

It's not likely that you will get a lawyer to answer your question because he or she would effectively be giving legal advise to people who are residents of States/Countries where any given lawyer is not licensed to practice law; a definate no-no.

You should, therefore, consult an attorney in your area who has experience with product liability issues. The advise will cost you, but it'll be better than a poke in the eye with a sharp stick.

Mark

Re: Wands and liability

#4

I'll Translate

Ron in Drums PA

>Yes you can get sued.

Re: Wands and liability

#5

I would check with the *LINK*

Jim K in Trappe PA

>Ministry of Magic. I'm sure they've run into this before.


Ministry of magic

Re: Wands and liability

#6

Re: Wands and liability

Jennifer@Indy.USA

>Bill,

I never thought about this? That would be a real bummer. My main concern with the ones I've made, that are very powerful wands I might add, is that some kid doesn't turn his sister into a goat or something!

ha! Kidding :)...I'm sure someone cound find a way to sue anybody. It's pretty sad really.

Jen

Re: Wands and liability

#7

Re: Wands and liability

John Lucas

>Jennifer I need to borrow one that will turn my boss into something else. Someone abviously used one to turn him into an ass so maybe I can turn him into something else.

Re: Wands and liability

#8

Re: Wands and liability

John K Jordan

>Yes, unfortunately anyone can sue anyone else for anything and there are those who spend their lives trying to get rich this way (although collecting is not nearly as easy as suing). But to try to limit our liability in life to zero we'd never go out in our cars, wouldn't own property, and would never give away or sell anything, even in a yard sale.

JKJ in East TN

Re: Wands and liability

#9

Re: Wands and liability

Barbara Gill, Remlik VA

>That is one reason I don't turn items that encourage people to use fire (i.e. candle holders and those little things that hold lantern fluid). If some dope can spill coffee on her lap and sue McDonald's successfully I don't want to take an unnecessary chance.

I agree that you shouldn't pattern your life around not getting sued but there are ways to reasonably reduce your risk.

Re: Wands and liability

#10

Re: Wands and liability

Bruce McElhaney Spring Lake, MI

>I agree with JKJ. Keeping in mind that the courts are a bit more senitive to suits involving products that can harm children. But if pencils and pens are considered safe, I wouldn't worry too much about a Magic Wand law suit. Now that flying broom might be a different story. . .

Re: Wands and liability

#11

Re: Wands and liability

Gary Evans Tallassee, TN

>Not to be too cynical, but I would guess that the liklihood of your being sued would be somewhat dependent on your financial state. Lawyers typically like to go after those with deep pockets.

Gary

Re: Wands and liability

#12

Re: Wands and liability

Ed Davidson

>In my opinion, the best protection is to shelter your personal assets by incorporating your business, even if it’s just an advanced hobby, and then being very careful to not co-mingle your personal and business activities…always prepare invoices, get paid and pay your business’s bills in the Corporation’s name for example.

For a small start-up business, one of the biggest expenses is paying for an in-State agent ($100 to $200 a year), which you can avoid if you incorporate in the State you live in; that is, you act as the agent. In Colorado where I live, you can do all the paperwork on-line through the State Attorney Generals office website, and form an LLC for about $50. The whole process takes about 24 hours. There are hundreds, maybe thousands of companies who for a $50 to $200 fee will assist in the process of incorporating.

best regards,

Ed D.

Re: Wands and liability

#13

Re: Wands and liability

John Lucas

>Gary With that in mind I could turn anything I want. Ice pickes, swords, bows and arrows. I mean what are they going to get if they sue me. My bills?

Re: Wands and liability

#14

Re: Wands and liability

Dave Anderson Chester, NH

>I absolutely agree with you Ed. Since I make and sell tools which are sharp and pointy I went this way right from the start to protect the family assets (as opposed to jewels-wink wink). Forming an LLC in NH is quite easy and only cost me aout $150 and has a yearly charge from the state under $100 (I can't remember how much exactly right now, I'm at work.)