Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Experiment with Prisma Marker

Posts

Experiment with Prisma Marker

#1

Experiment with Prisma Marker

Mike Rubes, Apex, NC

>Hi all,

A friend here at work asked me about doing a purple bowl for her. Sure, says I, I can do purple :) I then went and tried to mix some purple dye from my red/blue aniline supplies and the best I could get was sort of a deep burgandy. I just didn't have the hang. However, thinking about the beautiful work that Jennier Shirley and others have done with the Prisma markers, I stopped by AC Moore and picked up a few. Here's the result :)

This is a simple little 6 inch by 2 inch piece of birdseye maple I got for Christmas last year and have been waiting to play with. While I really like the bowl and the simplicity of working with the markers, I think the dyes tend to give a more uniform color. Also, the markers tended to obscure more of the grain than I wanted, but some of that may also have been the fact that this is purple. Of course, this is just my first attempt with the markers, so may change my tune after a few more. There was a ton of good information in the archives here for working with the markers. In the end, I just sort of tossed caution to the wind, colored the bowl, used Tried and True to cover the whole bowl, let it set for about an hour and then buffed it with the Beall system. It turned my wheels purple, but about 30 seconds per wheel with some 60 grit cleaned them right up. Seeing how much compound I got off the wheels, it time to clean them anyway.

Thanks for taking a look, opinions are welcome and encouraged.

Many thanks to Jennifer and the other Prisma color users for great past posts about methods for using the markers. Note that I am NOT a photographer! The bowl is really a striking purple color in person. Not nearly so dark as the pictures show.

Mike

Gone plum purple crazy in Apex, NC










Re: Experiment with Prisma Marker

#2

Looks really good from here. Gotta try mine soon.

Dave Smith, Longview, WA

>

Re: Experiment with Prisma Marker

#3

Re: Experiment with Prisma Marker

Carole in VA

>Looks good to me, Mike. I used the markers on a maple natural edge vase that had ugly mould stains on it. I put Watco on afterwards but have not buffed it yet bceause I was afraid I wouldn't be able to get the red color off my bowl buffs (I don't have wheels yet)! I am going to let it dry for a few weeks and hit it with lacquer. Which Tried and True finish did you use?

Re: Experiment with Prisma Marker

#4

Re: Experiment with Prisma Marker

Jennifer@Indy.USA

>Hey Mike,

It looks great. I've never used the markers to color such a large area as you have here thinking that I would get overlap marks, but I don't see any on your bowl. You say the dye gives a more even finish and I'm sure thats probably because its penetrating deeper than the markers. Your bowl looks great! I like the steps on the rim down into the purple inside. Very nice.

Jennifer

Re: Experiment with Prisma Marker

#5

Re: Experiment with Prisma Marker

Mike Rubes, Apex, NC

>Hi all,

Thanks for your notes. Carole, I used the "standard" Tried and True Varnish. The jar is in my shop and to be honest, I'm not exactly sure which type is was. I will check the next time I go, but that will not be until later this week. Jennifer, there were some lines, but I sanded the inside lightly with 500 grit and then with a scrap of brown paper bag. That seemed to even out the marker lines pretty well.

Thanks for your comments, I look forward to playing with the markers on some other pieces.

Mike

Being a colorful character in Apex, NC...

Re: Experiment with Prisma Marker

#6

Re: Experiment with Prisma Marker

Wally Dickerman in Arizona

>Lots'a ways to use a prismacolor pen.

Wally

Re: Experiment with Prisma Marker

#7

Re: Experiment with Prisma Marker 

Wally Dickerman in Arizona

>


img

Re: Experiment with Prisma Marker

#8

Re: Experiment with Prisma Marker

Mike Rubes, Apex, NC

>Hi Wally,

That's a really neat bowl, thanks for the pic. I like that patchwork quilt design. I look forward to playing with the markers some more to see what comes out of it.

I hope things are going well for you. Work (and Sam and Calvin!) have been keeping me hopping so I've not had much shop time or time on Wood Central :) Hopefully, things will get a little calmer now that the boys are back in school.

Thanks again for the picture, your work is always great to see.

Mike

Thinking, thinking, thinking in Apex, NC...