Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

A lesson, Please, On wet sanding?

Posts

A lesson, Please, On wet sanding?

#1

A lesson, Please, On wet sanding?

Barry Irby

>Can someone who actually wet sands give me a lesson? I posted my saga about the Watco finish several messages down. I tried wet sanding and it seems to have worked, so I want to know more. Notice how I tried it first and then asked for the lesson?? Hmmm? Maybe I should turn that around int he future.

What do you do? Put on some finish and sand it wet? Wet with what? more finish? Thinner? What about the sludge? Wipe it off? Paper towels or rags? What grits? I hear talk of using the sludge as grain filler. Can you explain. What finishes are you working with? Does this work on bare wood? TIA

I tried 400 wet or dry paper wet with mineral spirits until the surface was clean and smooth and it appears to be "coming back" much faster than the one I sanded back to bare wood.

Re: A lesson, Please, On wet sanding?

#2

Re: A lesson, Please, On wet sanding?

John Lucas

>Barry I can only tell you what I do and it's probably completely different than others. I have two techniques. On is when I'm sanding with the finish. Something such as watco or danish oil. I apply several coats after I've sanded to 400 grit. Then I dip the sandpaper, 600 grit wet or dry in the oil and sand with that. I sand until I build up a slurry then I'll wipe this off across the grain. Let it dry and do this again. I'll keep doing this until I reach the degree of smoothness or gloss or both. Usually when I use this finish I'm looking for a very smooth satin natural looking finish. Be careful with this on light colored woods the gray wet or dry paper will tend to fill the pores with gray nasty look. I use a light colored paper when I need to on really light woods.

The other type of wet sanding I do is when I am trying to really polish a finish such as lacquer or shellac. I apply layers of finish until I've filled the grain. I sand with 220 on early coats and 400 on final coats just trying to flatten the finish and build it enough to fill the pores. When I've filled the pores I spray on another coat and then I'll sand this with wet or dry paper using muphy's oil as a lubricant. On furniture I use pumice and rhotenstone. On turnings I usually only dry sand up to 600 grit and then use the Beal system to finish.

I did try wet sanding with Walnut oil on some bowls. It was OK but I'm not sure it was worth the time involved for the finish quality improvement.

Re: A lesson, Please, On wet sanding?

#3

Re: More detail, please, on wet sanding?

Glenn Madsen in the SF Bay area

>More detail on Barry's question:

Is the piece on the lathe, with the lathe running?

Re: A lesson, Please, On wet sanding?

#4

Re: A lesson, Please, On wet sanding?

Brian Hahn in SW Wisconsin

>I do it similar to John with a few differences:

With Danish Oil or Watco, I apply the first coat, let it soak, wipe off and then dry for a day. Second coat is applied and immediately sanded with 320 wet/dry sandpaper, adding more oil as needed. Wipe the slurry off and let it dry for a day. Third coat is applied and sanded with 400 wet/dry, wiped dry and let cure for a day. It usually doesn't need a fourth coat, but if it does I sand that one in with 600 grit. I do this both for turned objects and flat work. Since it takes several days, all work is done off the lathe. I usually do it in batches. Buffing and/or wax are optional final steps.

I wet sand surface finishes (varnish, wipe-on varnish, lacquer, etc.) with wet/dry sandpaper using water as a lubricant. Typically I sit at the laundry tub with a bucket of water that has a few drops of detergent in it. Dip the piece in the water and sand. Rinse with clean water and wipe dry. Apply next coat of finish and let it dry. Repeat until I have the finish that I want. It's the same process that I learned when I was young and trying to touch up the paint on the family station wagon.