Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Are you woodturning or killing snakes?

Posts

Are you woodturning or killing snakes?

#1

Are you woodturning or killing snakes?

Stuart Johnson

>Back in the old days when I knew everything my Dad still took the time to try to show me how to do stuff. One of the things he was always sayings was "Slow down. You're (insert activity) not killing snakes".

Now I know some here are production turners and time is money. But for the rest of us is speed so important. Look at the latest Tormek threads. Many post talk about how fast they can go to the grinder or Tormek and be back working. I am a poor hobbiest that can't think of a single reason why I care if it takes me two minutes or ten seconds to sharpen my tool. I don't have any need to have the grinder within a half step or for that matter I don't have the need to have all 500 (I wish) tools right at hand. If my tool needs sharpening I walk around behind the lathe to my Tormek. If the jig is set up fine, if not I set it up. I walk back to the lathe and if I had turned it off I take a look at my work. If I didn't turn it off I start cutting. If I need a different tool and it's not laying under the ways I walk over and pick it up, check to see if I sharpened it prior to putting up lat time and then either go to the Tormek or back to the lathe. The one thing I don't do is worry or even think about how long it took.

So back to the original question. Are you woodturning or killing snakes?

Re: Are you woodturning or killing snakes?

#2

Re: Are you woodturning or killing snakes?

Kevin Gerstenecker

>Nicely put Stuart. I am turning wood........and I could care less how long it takes. For me, it's not the destination, it's the journey that counts. Besides that, I can use the exercise! ;-)

Re: Are you woodturning or killing snakes?

#3

Re: Are you woodturning or killing snakes?

John Lucas

>Stuart I think we got a little carried away on the speed thing but it does matter to some. When you see a true production turner in motion, it's beautiful. There isn't any wasted motion. They will use one tool until it won't do the job anymore and then switch. They don't waste time going back and forth between tools. The same is true with grinding. No wasted time. My friend Randy hates honing a tool. He is one step from the grinder and in less time than it takes to say this he has resharpened his tool.

Watching Nick Cook turn is educational. He turns 50 wine stoppers in the time it takes the rest of us to turn 10. Personally I go back and forth. I need to make money with the lathe so I go into production mode and turn out 50 ornaments or 40 or 50 hand mirrors. When I get those out of the way it's time to slow down and have some fun again.

Do we really need to turn or grind fast. No. Turn as fast or as slow as you wish. For most of us this is a hobby and the idea is to have fun and enjoy it. Personally I have my grinder set about 5 feet from my lathe. My back will hurt if I turn too long. Walking several feet to my grinder relaxes my back. I also look at the grinder as a time to let my brain cool a little. I'll take my time putting the tool to the stone and let my body and mind relax a little.

Pesonally I don't kill snakes but I do need to slow down.

Re: Are you woodturning or killing snakes?

#4

Are you woodturning or just shop futzing?

bud

>To answer your question, I’m not killing snakes, I’m Woodturning. My Question; Are you Woodturning or are you shop futzing? Back in the old days when I knew everything my Dad still took the time to try to show me how to do stuff. I used to Dilly-Dally around a lot, one of the things he was always sayings was Are You (insert activity) or Futzing around. (Funny how most Dad’s sound the same in one way or the other).

The whole idea of what was brought up in that thread was to sharpen often and make your woodturning efficient, (there are so many out there think they sharpen their tools often but in reality do not) and to encourage one to sharpen often, one should make it as painless and convenient as possible. Many of the problems I hear from turners is the result of them not sharpening their tools often enough, so instead of walking half way across there shop where their grinder is- they start to push harder with several more cuts (now I know some of you know this is true) and when all that deep torn and or compressed fiber start showing up they wonder why. For some, the Sunday project may be to do a bowl and futz around the shop all day-there’s nothing wrong with that if that’s what you enjoy for your hobby. Don’t get me wrong, I try to have a nice easy going environment in my shop, however, I’m not retired, I work many 12 hour days, I like to spend time with my family, and I like to spend time making nice clean cuts to produce nice clean pieces- and that means to sharpen often but not spend a lot of time sharpening, searching for tools, or what-what-you. Something else that wasn’t mentioned is, at least for me, I can keep a better flow with my work (a rhythm if you will) by structuring menial task efficiently they don’t break up that “rhythm”..and it feels nice when it’s all flowing well.

So I ask my original question, you Woodturning or shop Futzing-and if you are- that’s ok, …but don’t imply I’m killing snakes.

But whatever you do, please Turn or Futz around safely!

Bud from IL

Re: Are you woodturning or killing snakes?

#5

Re: Are you woodturning or killing snakes?

theeviltwinn

>I turn for fun

Turning wood is more fun than sharpening

My tools need to be sharp to turn

Less time sharpening means more time turning

Mike

Re: Are you woodturning or killing snakes?

#6

Short, sweet, and to the point...

Peter Teubel

>

Re: Are you woodturning or killing snakes?

#7

Turning

Mark Mandell - Gone Round In Jersey

>Therefore I wish to spend as little time as possible sharpening tools.

Tell me I should spend $500+ on a grinder that will take 4 times as long to produce the working edge that I can get with a $100 setup, and I'll tell you about this nifty deal from the Nigerian Ministry of Finance . . .

Um, was this a trick question?

|;-}}

Re: Are you woodturning or killing snakes?

#8

Re: Shhhhhhhhh!

Barry Turner

>I've got one of those deals working right now. They're gonna share $26.5 million with me. They told me to keep quiet about it. All I've got to do is share my personal information, bank account number, etc. It sounds so sweet! :-)

Re: Are you woodturning or killing snakes?

#9

Re: Are you woodturning or killing snakes?

Earl Eyre

>This is one of those arguments where everybody is right! In my former job (owned a print shop) cutting 10 or 15 seconds out of a task, multiplied by how many times a day that task was done, cut significant time and added to the bottom line. Now that I'm retired, I'm a confessed Fuzzer. I simply love to go to the shop and take two days to turn and finish a project that I could probably push out in 2 hours if forced to. I think my work is better now but probably not enough to matter if I were a professional turner.

As for sharpening, I do think those jigs and wheels not only cut significant time in sharpening, but produce much more consistent sharpness. A pro might be able to sharpen fast and free hand, but not most of us.

Earl

Re: Are you woodturning or killing snakes?

#10

Re: Are you woodturning or killing snakes?

Tim Grenville-Cleave

>Well said Sir!! I am a 'house husband' (not through choice ... Injury forced retirement) When the kiddies 2 and 4 are in bed and the 10 year old is doing homework etc I relax in my little shed (colonial cousins read Shop) I may drink coffee, turn wood, make shavings, sharpen and hone tools as required. I may sit and look at a piece of wood/burr for ages (more coffee)trying to work out how to destroy it in the most practical or artistic way. I may just sit and contemplate life. The point to all this drivel. I am doing what I want to!!, I relax and enjoy my time with my wood, my lathe, my tools my jigs my Tormek, my belt grinder, my high speed grinder etc. etc. etc. and my own company.

Re: Are you woodturning or killing snakes?

#11

Re: Are you woodturning or killing snakes?

Curt Fuller

>But then sometimes it just becomes necessary to kill those futzing snakes!