Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Question on CA Solvent

Posts

Question on CA Solvent

#1

Question on CA Solvent

Barry Irby

>I have managed to get CA solvent on my watch, my glasses (plastic lenses) and my face shield. I have learned the hard way that it will spray everywhere even after you hit it with the accelerator.

Does any one know if the solvent will remove it without hurting the plastic its stuck to?

I have a bottle of the solvent, but have been saving it for an emergency. Such as, in case I glue my hand to a turning, again. (I keep it within arm's length of the lathe, for obvious reasons.)

IF it will work, if it worth it? A new "Lense" for the face shield might be cheaper than the whole bottle of release agent.

Re: Question on CA Solvent

#2

Re: Question on CA Solvent

Barbara Gill, Remlik VA

>Barry, do you mean you got the glue on your plastic lenses, etc.? If so, the people from whom you buy glasses should be able to get it off. I had a spot of black CA glue on one of my plastic lenses. When I went by to have my frames adjusted the guy disappeared into the back and when he reappeared, my glasses were cleaned.

Re: Question on CA Solvent

#3

Re: Question on CA Solvent

John Lucas

>I wish I could remember what my friend used on his face shield. I think it was acetone. Anyway it seemed to work but as soon as he flexed the shield even slightly it cracked all to shreds with lines running everywhere. I may be able to find out because I think that was either a tip in the Journal or newsletter so I may still have it. I'll look.

Re: Question on CA Solvent

#4

Re: Question on CA Solvent

Bart Rhoads

>Barry I have gotten CA glue on my glasses with plastic lenses a couple of time and I have used Acetone to remove it. What I have done is to put just a little of the Acetone on a corner of a cloth and wiped it gently just on the spot of CA and it has removed it with no problems. I have also used it on my faceshield and there again with no problems.

Re: Question on CA Solvent

#5

Re: Question on CA Solvent

Peter Toch

>That small bottle of "CA Solvent" is actually just acetone at an outragous price. Acetone will remove the CA, but the question is will it adversely affect the plastic to which you are applying it. That is going to depend on the particular chemical composition (styene, polyester, polycarbonate, acrylic, etc.) of the plastic in question. Best thing to do is to contact the manufacturer of plastic item you wish to clean with the acetone, ask them about it and also ask them for a suggested cleaner for their product. In leiu of contacting the manufacturer, test the plastics reaction to acetone in a small non-functional area like an upper or lower corner of a faceshield.

Re: Question on CA Solvent

#6

Re: Question on CA Solvent

The Wood Spinner / Bill Hale

>I use it on a fairly regular schedule. I also gave a bottle of it to the tech in my Opthomologists office to remove the CA that people use to glue their lenses back in with.

I buy the Drug Store glases to turn in but once in a while I get a brain cramp and wear my good glasses. For sure that is the day I use the CA and spinn it wet.

I also clean my mask with it.

Disclaimer If it does not work for you Sorry.

Good turning and be safe

Bill in Casa Grande, AZ.

Re: Question on CA Solvent

#7

Re: Question on CA Solvent

adrien

>I'm in John Lucas' corner. while acetone cleaned my glasses fine, my face shield became totally clouded! milk white. so as was suggested, test a corner first.

Re: Question on CA Solvent

#8

Re: Question on CA Solvent

John Lucas

>Peter I don't think the CA remover that I have is Acetone. It smells and feels completely different. Don't ask why I know how it feels.

Re: Question on CA Solvent

#9

Re: Question on CA Solvent

Peter Toch

>Hi John:

Interesting that you think that the CA Debonder you have is not acetone. What is the brand name and exactly what is it called. I can check out the MSDS which by law lists the ingredients. I'm very curious to see what else is used commercially as a solvent/debonder for CA.

Thanks, Peter

Re: Question on CA Solvent

#10

Thanks Everyone!

Barry Irby

>