Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Jet mini lathe saga...motor

Posts

Jet mini lathe saga...motor

#1

Jet mini lathe saga...motor

Dennis Taylor

>John don't know if my post to your topic got lost, or you haven't seen it.....do you know if the motor for the non variable speed mini will work for the dc?....Dennis

Re: Jet mini lathe saga...motor

#2

Re: Jet mini lathe saga...motor

John Lucas

>Dennis No the non variable speed motor is AC. It will probably fit but the Non variable speed lathe comes with a 5 step pulley and the variable speed lathe comes with a 3 step.

Re: Jet mini lathe saga...motor

#3

Re: Jet mini lathe saga...motor

Dennis Taylor

>I have one and if you could of used it, you could of had it....I don't have the mini anymore and if it could of helped you out....if there is anyone interested in a mini lathe non variable speed motor, I have one for the asking...Dennis

Re: Jet mini lathe saga...motor

#4

Re: Jet mini lathe saga...motor

John Lucas

>Dennis I will take it. I'm trying to make one of these lathes work for our small club. They can't really afford a lathe yet but if I can make this one work for $200 or less they can probably use it. I have a small metal lathe so I can probably turn the pulleys if needed. e-mail me at the above address and we'll discuss payment shipping etc. John

Re: Jet mini lathe saga...motor

#5

Pulleys

Fred in NC

>The pulleys are about $7 from JetTools. Only drawback is the shipping cost.

Re: Jet mini lathe saga...motor

#6

Keith Tompkins

Re: Jet mini lathe saga...motor

Keith Tompkins

>Hi Dennis, I don't know the answer to your question, but when you do get the lathe up and running, be sure to keep the motor area clear of chips and debris......otherwise airflow through the motor becomes restricted, the motor overheats and fails prematurely.

Re: Jet mini lathe saga...motor

#7

Re: Pulleys

Don Henthorn

>Wow! Fred. They charged me $25.00 for a pulley and shipping. Guess they saw me coming.