We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>I have a piece of comphor burl and intend to use it in a new hobby that im just getting into, pen turning. However the wood is supposed to be (green to partially air dry). What do I need to do to make sure that the wood does not crack after I turn it. Or should I have to wait for it to dry about 6 months before fooling with it. My turning skills is limited to a a few spindles and a chess set, and this is my first piece of wood that is not kiln dryed.
>John, there is a lot of great information here and I will give you my 2 cents worth. When turning pens you really need to make sure that the wood is dry. If you don't it will usually crack off of the brass tubes. I'd hate to see you work hard on a nice pen and then have the wood shrink as it dries and crack up. The DNA that Jim is talking about in the post below is Denatured Alcohol. Soaking the wood in the DNA and then letting it air dry has been found to dry the wood quicker than just waiting for it to dry on its own.