Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Penn State Barracuda2 chuck???? *LINK*

Posts

Penn State Barracuda2 chuck???? *LINK*

#1

Penn State Barracuda2 chuck???? *LINK*

Jennifer@Indy.USA

>Has anybody tried the new Barracuda2 chuck from Penn State? The price looks right....any comparisons to the Grizzly chuck that just came out not too long ago? I'm looking for a new chuck for my mini that I can use an adapter to put it my General as well. ....and trying to be thrifty at the same time!

Any help would be greatly appreciated!

Jen :)


Barracuda2 Chuck

Re: Penn State Barracuda2 chuck???? *LINK*

#2

Re: Penn State Barracuda2 chuck????

Denis Lalonde

>This chuck only comes in 3/4 x 16 or 1 x 8, if you have the general 260 it won't fit....you should look at the Talon...

Re: Penn State Barracuda2 chuck???? *LINK*

#3

Re: Penn State Barracuda2 chuck????

Russ Fairfield

>I have look at, held, fondled, but not used, all of the Penn State chucks. I was impressed by what I saw. They are sturdy, have no slop in the fit to the scroll, and the machine work is excellent. I cannot attest to the quality of the steel they use or their accuracy; but I don't think most woodturners will ever notice the difference, and the price is right.

However, something is always missing in the copy. On these chucks it is that the full circle of the jaws occurrs when they are fully closed. That means that every grip on a tenon will be at the sharp edges of the jaw, and I would never be able to have a "true circle" fit all the way around a finished tenon or recess that I wanted to save with as little damageas possible. This is an important thing with the chuck for me, enough so that I would never buy one of them, regardless of their quality or low price. I would think it also important for someone who wanted to have a light grip, such as on a box. For most woodturners this wouldn't matter, and would not interfere with their use of the chuck.

Re: Penn State Barracuda2 chuck???? *LINK*

#4

Re: Penn State Barracuda2 chuck???? *LINK*

John Morovich

>I have a oneway talon but I recently purchased the H 6265 chuck from Grizzly. I have been using it for several months and done bowls up to 11 inches with no problem. The jaws use a dovetail grip. The 89.00 price was hard to beat for a secondary chuck. Check page 96 in the Grizzly catalog, there are four models depending on thread size.


http://www.grizzly.com/catalog/2005/main/096.cfm?

Re: Penn State Barracuda2 chuck???? *LINK*

#5

Interchangeable jaws?

Jack Savona

>Does anyone know if either the Penn State or Grizzly chucks mentioned will accept jaws from the major brand name mfgs.?

Re: Penn State Barracuda2 chuck???? *LINK*

#6

Re: Interchangeable jaws?

Chris Wright

>One of the members on WR bought the Grizzly chuck and reviewed the chuck for the group along with other brand match ups. Scroll down page one of the comments & you can read the lengthy response Gil gave: http://www.turnwood.net/Photopost/showphoto.php?photo=869&sort=1&cat=502&page=1

Re: Penn State Barracuda2 chuck???? *LINK*

#7

Re: Interchangeable jaws?

Don Henthorn

>I alos received one and have used it once. Good value. On the thread listed in the last post I too found that the smaller allen wrench was too small. I called Grizzly and told them that they had sent a number 2 instead of a number 3 wrench. They sent me the right size and it fits great.

Re: Penn State Barracuda2 chuck???? *LINK*

#8

Re: Penn State Barracuda2 chuck????

Jennifer@Indy.USA

>Thanks Everybody...much appreciated!