Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

hollowing drill bits

Posts

hollowing drill bits

#1

hollowing drill bits

John Lucas

>I just got an Enco flyer in the mail. They have #2 and #3 morse taper drills up to 3/4" 9" long for $5.89 pt.no. Fl3031248. #3 Up to 1 1/16" 11" long. for $12.49 pt.no. FL303-1368. These are really great for boring starter holes in hollow turnings. Just stick them in the tailstock and push it in. 1-800-873-3626

Re: hollowing drill bits

#2

Re: hollowing drill bits

John Trant (Baltimore/DC corridor)

>I agree that these are wonderful conveniences. I inherited a set from my Dad and use them all the time for hollow forms, ornaments, vases, boxes, etc. In fact, for my ornaments, I drill a hole with a 3/4" bit (the bottom of the ornament) through which I hollow. THis hole is large enough for my little finger to feel for wall thickness. To keep the finial delicate, I finish the hole with a 5/8" bit. It is very easy to quickly change out bits rather messing with a drill chuck.

John

Re: hollowing drill bits

#3

Re: hollowing drill bits

Frank Martin

>Thanks for the heads up John. just ordered a couple

frank

Re: hollowing drill bits

#4

Lengths are overall and include morse taper shank.

Al Crandall--NE of Indy--

>

Re: hollowing drill bits

#5

If true, then too short to be useful

John Trant (Baltimore/WashDC)

>