Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Osage Orange Bowl

Posts

Osage Orange Bowl

#1

Osage Orange Bowl

Jim Ketron

>Thanks Kevin for the wood!

It had some small hairline cracks on the outside after drying, but they turned away during the finishing of the bowl

This was by far the easiest sanding species that I have ever done, it took about 30 Min tops to finish this one baby butt smooth, with no sanding scratches to boot

This was my first time using the wire burning method it turned out ok, I think I will try it more in the future.

I dont think I could have centerd it up any closer im pleased with this part , even on both sides of the bowl.

It measures 7" X 2 7/8" Finish is deft and hand waxed.


img

Re: Osage Orange Bowl

#2

Re: Osage Orange Bowl

Jim Ketron

>Another View


img

Re: Osage Orange Bowl

#3

Re: Osage Orange Bowl

Don Henthorn

>That was a great job of balancing it out. Just have to love that OA and a very nice form as well.

Re: Osage Orange Bowl

#4

Re: Osage Orange Bowl

Kevin Turner

>looks nice. I've never turned osage... What does it compare too? Sure a wire... for burning.. I didn't know that... And I attempted this today with little sucsess. Thanks KevinT

Re: Osage Orange Bowl

#5

Re: Osage Orange Bowl

Jim Ketron

>yep I used a wire I had to turn the lathe way up to get enough friction to burn also a friend told me that formica will work better than a wire.

This is some very hard wood even wet,it compares close to purple heart or locust that I have turned when dry.

It sands nicely!

Re: Osage Orange Bowl

#6

Re: Osage Orange Bowl

Kevin Gerstenecker

>Simply a beautiful Bowl Jim. I am happy to see you are enjoying turning that Osage. There is more where that came from.............Osage Orange grows on trees around here! ;-)

Nice job Jim..........I agree with everything you said.........it is a joy to turn, and even more fun to sand and finish!

Re: Osage Orange Bowl

#7

wire burning

tek-Brunswick, Ohio

>Since you haven't done wire burning before, here are a couple of tips.

1. It helps to cut a small groove, usually with the point of a skew. Let the wire ride in the groove. This helps control the placement of the groove. You can be very precise that way.

2. DON'T wrap the wire around your fingers to hold it! One catch with the wire held that way could cut off needed didgets. Wrap the ends of the wire around some dowels and use them for handles. Turning the handles could be some good skew practice.

Tom

Re: Osage Orange Bowl

#8

Re: wire burning

Bob R

>Jim

Try using different size wire for different look. A great way to highlite something.

Also, after it smokes good, back off and then increase the pressure a bit and it will do a great job of buffing the burn.

Bob R WestMacTurning