Thanks guys
Ed Kelle
>The bowl sure was an adventure for me. Here's what happened... I returned the roughout after drying, then about a day later I noticed some pith cracks, one each side both going in the same direction and about the same size. For a few days I sketched on the bowl to see if I could carve something to remove the areas, but never was satisfied with what I came up with. I figured that this bowl was probably a goner so I decided to experiment a bit so I cut right thru the cracks, it was suprising that they happened to line up. I wasn't totally satisfied so I ran blue tape around the outside to give myself a depth line then continued with more cuts at random angles, sometimes going thru both sides with one cut. Did I bunch of these and still wasn't sold on the idea so then I considered cutting out areas between the slots but decided to just texture the outside.
I use the small diamond bits in my Dremel. There is a set of about 15 for $20, they seem to work fairly well but still you get some slight scratching in the holes. I finished a few hours later after going over and over the whole surface with 3 different round bit. No matter what speed of how easy I went with the bits, I seem to usually get some burning on the endgrain. Even though I cleaned the bits very often on one of those rubber sanding belt cleaners.
So I decided to stain it to hide the burns like I have done before. The idea for the gold came from Mikes bowl the other week. I wanted to make it look worn so I used a foil kit. Worked fairly well. then sealed with spray matte varnish.
So I learned a bunch from this piece that I thought was a throwaway. I'm pretty happy with the results. The cuts might not fit in with the whole piece, but they do manage to add a bunch of contrast and even some conflict to it which at least provokes some thought.
If I continue cutting into bowls, I will try to plan it out more, but I've always been someone who develops things on the fly. I like taking risks with works and the adventure from that is more important to me than the outcome most times.
I'm having a bunch of fun with all of this and getting lots of ideas from all the great works I see here