Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

First Lathe. Now what?

Posts

First Lathe. Now what?

#1

First Lathe. Now what?

mr.woodwerkz

>I just bought a 36" Dunlap (Sears) lathe for $125.00. It has a jaw chuck and two plates to mounting wood, and 13 different tools. Never been here before. I now need to know what books I need to learn the basics before I start to destroy some wood. I enjoy doing in lays, so I suspect I'd like to get into bowls etc. Thanks in advance for all your help.

Re: First Lathe. Now what?

#2

Re: First Lathe. Now what?

John K Jordan

>Hi Mr wwz,

Oh no, another victim, hopelessly ensnared by the siren song of spinning wood!

I buy (and read) nearly every book I can find (just ask my wife). For starting out, I can highly recommend a few:

"The Fundamentals of Woodturning" by Mike Darlow

"Turning Wood" by Richard Raffan

"Woodturning, A Foundation Course" by Keith Rowley

Each has introduction, instruction, exercises, and projects. If you want to concentrate on bowls, "Turning Bowls" by Raffan is also good after you get the fundamentals down.

Some people need moving pictures to learn so if you're in that camp Raffan has companion videos that go along with his books. The videos by necessity leave out most of the details so if I couldn't get both I'd get the book and borrow the video later. There are many, many other good books and videos as well. Stop and browse the books in a Woodcraft store if you have one near you.

Also, a great way to get started is to take a course. And join a club!

JKJ in East TN

Re: First Lathe. Now what?

#3

Library

DougJ in Crawfordsville, IN

>Check out your local library for books, ask around town about people that turn wood, get into a local woodworking club (almost every club has at least one turner). Along with that I recommend Bill Grumbine's video.

Re: First Lathe. Now what?

#4

Brad Vietje

Counseling !

Brad Vietje

>Yup -- you're on the threshold of addiction !

Truthfully, the next step is the AAW, or American Association of Woodturners (www.woodturner.org). Do yourself a favor, and visit their site to find the AAW affiliate club nearest you --you'll never regret it. Contact the club, and find out where and when they will be meeting, and make the effort to go. The club secretary can tell you if any members live near you. "Near" can mean different things to different people; I travel 2 hours each way to attend club meetings here in VT, and that would not be an unreasonable effort to get started on the hobby of a lifetime.

Books and videos are a great way to learn, but they are most effective when used to reinforce hands-on instruction at the lathe or live demos at club meetings. If you can visit a local turner and learn one-on-one, of invite them over to help you get started, you'll get the best possible introduction to the addiction we call woodturning.

Safe Spinning,

Brad Vietje

Thetford, VT

Re: First Lathe. Now what?

#5

Keith Tompkins

Re: Counseling !

Keith Tompkins

>Then, change your name to Mr. Woodturnz!